Nordyne CMF - User Manual

Need help?

Do you have a question about the Nordyne CMF and is the answer not in the manual?

Summary

Turning On Your Heating System

Your Wall Thermostat

Details on thermostat operation, placement, and energy-saving settings.

NORDYNE Air Conditioning

Information on compatibility and benefits of NORDYNE central air conditioning.

Furnace Operation Troubleshooting

Furnace Doesnt Operate

Steps to take if the furnace fails to start, including fuel, power, and thermostat checks.

Furnace Wont Turn Off

Immediate actions and advice for an overheating or continuously running furnace.

Turning Your Furnace Off

Procedure for safely shutting down the furnace using the thermostat and power.

Using Furnace Fan for Cooling

How to use the furnace blower to circulate air for summer cooling.

Proper Flue Gas Venting

Critical safety information on flue gas venting and the need for professional maintenance.

Convertible Firing Rate

Information on changing the furnace's firing rate using a certified conversion kit.

Oil Furnace Maintenance

Oil Furnace Service Requirements

List of seasonal maintenance tasks for oil furnaces performed by a qualified contractor.

Furnace Care and Maintenance

Filter Cleaning

Instructions for cleaning or replacing furnace filters for optimal performance.

Yearly Maintenance

Importance of annual servicing for safe, cost-effective furnace performance.

Read Your Warranty

Guidance on reviewing the limited warranty for valuable furnace information.

Summary

Turning On Your Heating System

Your Wall Thermostat

Details on thermostat operation, placement, and energy-saving settings.

NORDYNE Air Conditioning

Information on compatibility and benefits of NORDYNE central air conditioning.

Furnace Operation Troubleshooting

Furnace Doesnt Operate

Steps to take if the furnace fails to start, including fuel, power, and thermostat checks.

Furnace Wont Turn Off

Immediate actions and advice for an overheating or continuously running furnace.

Turning Your Furnace Off

Procedure for safely shutting down the furnace using the thermostat and power.

Using Furnace Fan for Cooling

How to use the furnace blower to circulate air for summer cooling.

Proper Flue Gas Venting

Critical safety information on flue gas venting and the need for professional maintenance.

Convertible Firing Rate

Information on changing the furnace's firing rate using a certified conversion kit.

Oil Furnace Maintenance

Oil Furnace Service Requirements

List of seasonal maintenance tasks for oil furnaces performed by a qualified contractor.

Furnace Care and Maintenance

Filter Cleaning

Instructions for cleaning or replacing furnace filters for optimal performance.

Yearly Maintenance

Importance of annual servicing for safe, cost-effective furnace performance.

Read Your Warranty

Guidance on reviewing the limited warranty for valuable furnace information.

This document is the owner's manual for the NORDYNE Power Oil/Power Gas Furnace, Model CMF. It provides essential information for the safe and efficient operation, maintenance, and troubleshooting of the furnace.

Function Description

The NORDYNE CMF furnace is designed to provide heating for residential spaces, operating on either oil or natural gas, depending on the specific model. It works in conjunction with a wall thermostat to automatically maintain a desired room temperature. The thermostat senses changes in room air temperature and signals the furnace to turn on or off accordingly. The furnace circulates heated air through a duct system to warm the home.

Important Technical Specifications

The manual does not explicitly list detailed technical specifications such as BTU output, dimensions, or electrical requirements. However, it highlights several operational aspects:

Fuel Type: Available in Power Oil Furnace and Power Gas Furnace configurations.
Convertible Firing Rate: The furnace's firing rate can be converted using a certified NORDYNE conversion kit, which must be installed by a qualified distributor or Service PRO. This suggests flexibility in adjusting heating capacity.
Safety Features: Designed with flue and vent systems to safely direct flue gases outdoors. The manual emphasizes the importance of proper maintenance of these systems to ensure safety.
Air Conditioning Compatibility: The furnace is designed for use with NORDYNE central air conditioning units, which are described as energy-efficient, money-saving, and self-contained. NORDYNE AC equipment is UL Listed, CSA, and ARI Certified, and comes with a limited warranty.

Usage Features

Thermostat Control: The primary interface for users to control the furnace's operation. Users can set the desired temperature, and the thermostat will automatically manage the furnace.
Energy Saving Tips: The manual advises setting the thermostat to the lowest comfortable temperature and lowering it by 5 to 15 degrees at night or when away from home to save energy.
Summer Fan Operation: If equipped with a fan switch, users can set it to "ON" to circulate air through the home via the duct system, providing cooling without operating the heating element.
Troubleshooting Guide: Provides a "What To Do If Your Furnace Doesn't Operate" section, which includes checking fuel valves, fuel supply, circuit breakers/fuses, and thermostat setting.
Emergency Shut-off: Instructions are provided for what to do if the furnace overheats or won't shut off, which involves immediately turning off the main supply line valve and the electricity to the furnace.
Turning Off the Furnace: Users can turn off the furnace by setting the thermostat to "OFF" or its lowest temperature setting, then turning off the electric power.

Maintenance Features

Professional Maintenance for Oil Furnaces: For oil furnaces, the manual recommends annual service by a qualified service contractor. This service includes:
- Replacing the oil nozzle with the specified type.
- Cleaning, adjusting, and replacing spark electrodes if necessary.
- Resetting the nozzle/drawer assembly to factory specifications.
- Cleaning the furnace heat exchanger and replacing the combustion liner if needed.
- Cleaning/replacing the oil filter element at the oil tank.
- Adjusting the burner for top efficiency and checking for tight fittings.
Flue and Venting System Maintenance: The flue and venting system should be checked and cleaned every 12 months, or more frequently if damage is suspected. This critical service must be performed by a NORDYNE distributor or Service PRO for safety reasons.
Filter Cleaning: Furnace filters must be cleaned at least twice a year, or more often if dust is excessive. Filters are located behind the access door and can be removed, washed, or vacuumed. Damaged filters should be replaced with genuine NORDYNE filters.
Yearly Maintenance: To ensure the safest and most cost-effective performance, annual servicing by a NORDYNE distributor or Service PRO is recommended. The manual emphasizes insisting on genuine NORDYNE replacement parts.
Warranty Information: Users are advised to read their limited warranty completely and contact their NORDYNE distributor for any questions regarding warranty information.

The manual serves as a comprehensive guide for homeowners to understand and manage their NORDYNE CMF furnace, emphasizing both user-friendly operation and the importance of professional maintenance for longevity and safety.