EasyManuals Logo

Noritz RC-9018M User Manual

Noritz RC-9018M
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
* Display when high temp is set
NOTE
If the set temperature requires
frequent adjustment, locate the
Remote Controller in an easily
accessible location.
Consult local codes for minimum
operating temperatures.
Noritz recommends that water
temperature is set as low as
possible to prevent scale build-up
in the heat exchanger.
NOTE
These settings are only available on
commercial products.
(e.g. 125°F)
Blinks for approximately
10 seconds Displayed
Setting Hot Water Temperature
[When using °C mode]
(Default setting is 40°C (104°F))
37°C (99°F)
Washing dishes, etc.
38°C (100°F)
39°C (102°F)
Shower, hot water supply, etc.
40°C (104°F)
41°C (106°F)
42°C (108°F)
43°C (109°F)
44°C (111°F)
45°C (113°F)
46°C (115°F)
47°C (117°F)
48°C (118°F)
50°C (122°F)
55°C (131°F)
High temperature*
(The maximum output temperature
can be set using the remote
contoroller. (See page 10))
60°C (140°F)
65°C (149°F)
70°C (158°F)
75°C (167°F)
80°C (176°F)
85°C (185°F)
Temperature Setting Options
The temperature settings below are examples.
The temperature setting necessary depends on the usage,
the length of piping and the season.
For residential products beginning with the prefix
“NR”:
For commercial products beginning with the prefix
“NC”:
[When using °F mode]
(Default setting is 110°F)
100°F
Washing dishes, etc.
105°F
Shower, hot water supply, etc.
110°F
115°F
120°F
125°F
High temperature*
(The maximum output temperature
can be set using the remote
contoroller. (See page 10))
130°F
135°F
140°F
145°F
150°F
160°F
170°F
185°F
[When using °F mode] (Default setting is 110°F)
100°F
Washing dishes, etc.
105°F
Shower, hot water supply, etc.
110°F
115°F
120°F
125°F
High temperature*
(The maximum output temperature
can be set using the Remote
Controller. (See page 10))
130°F
135°F
140°F
[When using °C mode] (Default setting is 40°C (104°F))
37°C (99°F)
Washing dishes, etc.
38°C (100°F)
39°C (102°F)
Shower, hot water supply, etc.
40°C (104°F)
41°C (106°F)
42°C (108°F)
43°C (109°F)
44°C (111°F)
45°C (113°F)
46°C (115°F)
47°C (117°F)
48°C (118°F)
50°C (122°F)
55°C (131°F)
High temperature*
(The maximum output temperature
can be set using the Remote
Controller. (See page 10))
60°C (140°F)
SHB8126(1)取説RC-9018M.indd 6 2019/08/30 16:41:51

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Noritz RC-9018M and is the answer not in the manual?

Noritz RC-9018M Specifications

General IconGeneral
BrandNoritz
ModelRC-9018M
CategoryRemote Control
LanguageEnglish