EasyManua.ls Logo

Norrkoping LS520D-7 - Wedge Sharpening; Problem Solving; Troubleshooting Common Issues

Norrkoping LS520D-7
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodically check oil level to ensure it is between 2 grooves around the Dipstick. Upon lower oil level,
oil relling is required.
Following hydraulic oils or equivalent are recommend for the log splitter’s hydraulic trans-mission
system:
- SHELL Tellus 22
- MOBIL DTE 11
- ARAL Vitam GF 22
- BP Energol HLP-HM 22
Sharpening wedge
After using the log splitters for some time, sharpen the wedge of the log splitter using a ne-toothed
le and smooth any burrs or crushed area along the cutting edge.
TROUBLESHOOTING
Importer: Tamforce Group, Finland