Do you have a question about the Norrkoping LS520D-7 and is the answer not in the manual?
Congratulations on choosing the product. Read manual before first use for safe operation.
Read and follow all safety instructions and warnings carefully for correct and safe appliance use.
Wear appropriate clothing, gloves, and eye/ear protection. Tie up long hair.
Keep guards in place. Do not abuse the cord; keep it away from heat and sharp edges.
Use correctly rated extension cords for outdoor use only, ensuring proper wiring and condition.
Secure work with clamps, maintain tools, and disconnect power before servicing.
Stay alert, do not use when impaired, and check appliance for damages before use.
Use only original spare parts. Repairs must be done by an authorized service center.
Place on a stable bench, secure against slipping, and ensure proper electrical connections.
Inspect logs, do not force the machine, and avoid overreaching during operation.
Lists specifications like motor, splitting force, dimensions, and weight of the log splitter.
Specifies connection to a standard 230V supply with appropriate protection devices.
Details the log splitter as a home-use model designed for specific ambient conditions.
Warning against adjusting the max pressure limiting screw to avoid damage or injury.
Instructions for assembling the log splitter and familiarizing with its controls.
Guidance on loosening and tightening the bleed screw for proper hydraulic system operation.
How to operate the two-handed control system and split logs safely.
Tips for securely placing logs, avoiding blade damage, and splitting direction.
Procedure for safely removing a jammed log using wedges, avoiding forceful methods.
Step-by-step guide for replacing hydraulic oil after 150 hours of use.
Instructions on how to sharpen the log splitter wedge for optimal performance.
Identifies problems like failure to split logs or jerky pusher movement and their causes/solutions.
Instructions for assembling the stand for the log splitter.
Identification of parts for assembling the stand, labeled as OSA A.
Steps to fasten the front legs and horizontal tube to the stand.
Identification of parts for assembling the stand, labeled as OSA B.
Steps to fasten the back legs, horizontal axle, and wheel axle.
| Brand | Norrkoping |
|---|---|
| Model | LS520D-7 |
| Category | Log Splitter |
| Language | English |
Loading...