Need help?Do you have a question about the NORSELIGHT R60 Series and is the answer not in the manual?
General| Category | Flood Light |
|---|---|
| CRI | >80 |
| Beam Angle | 120° |
| Input Voltage | AC100-277V |
| Frequency | 50/60Hz |
| Power Factor | >0.9 |
| Ingress Protection | IP65 |
| IK Rating | IK08 |
| Housing Material | Aluminum |
| Operating Temperature | -40°C to +50°C |
| Color Temperature | 3000K/4000K/5000K |
| Lifespan | 50000 hours |
Information about customer service department for spare parts, maintenance, and repair.
Details of the manufacturer, GLAMOX Production GmbH & Co. KG.
Describes the R60 searchlight construction materials and main components.
Details the functions and features of the main control panel.
Lists the components and functions of the slave control panel.
Lists the components and functions of the wireless control panel.
Lists available software enhancements and features for the searchlight.
Lists available physical and accessory options for the searchlight.
Comprehensive specifications for searchlight units, control panels, and network components.
Provides cutout dimensions for the main control panel installation.
Provides cutout dimensions for the slave control panel installation.
Diagram illustrating the system layout and interconnection of components.
Wiring diagram detailing the connections for the remote panel with integrated power supply.
Describes the initial power-on sequence and procedures following power loss.
Initial step to begin hardware configuration from the main home menu.
Methods for selecting individual or multiple searchlights for settings.
Configuring the searchlight's installation orientation and zero-point reference.
Instruction to connect slave panel wiring based on a specific drawing.
Options for configuring slave panel direction, speed, and on/off functions.
Describes operation using software and hardware joysticks on main and slave panels.
Details configuration options for joystick controls on both main and slave panels.
Mentions the availability and function of an optional analog proportional joystick.
Guides on help, signals, home menu, selection, and mechanical stop indicators.
Settings for searchlight configuration including home, sweep, limits, and focus adjustments.
Information on lamp control, vertical/horizontal position indicators.
Settings and operational guidance for joystick control and movement speed.
Allows selection and control of multiple searchlights from the main menu.
Procedure for accessing the home menu by pressing the Home button.
Information on adjusting the panel brightness through a pop-up menu.
Displays PLC input/output status, with yellow indicating logic ON.
Defines how to set sectors to limit searchlight horizontal and vertical movement.
Instructions for starting and configuring horizontal and vertical sweep movements.
Procedures for setting and configuring Home position 1 and Home position 2.
Important warnings regarding the correct setting of sector limits.
Information on how to access help menus within the system interface.
Details on PLC inputs and outputs, including status indication and definitions.
Help section pertaining to sweep mode and home position settings.
Help section for understanding and configuring sector limits.
Explanation of how to reverse main panel joystick movements.
Explanation of how to reverse slave panel joystick movements.
Instructions for enabling the slave panel and setting its operational speed.
Displays the specific version number for Searchlight 1.
How to access the alarm handling interface from the home menu.
Visual indicators used to signify the presence and status of alarms.
Explanation of the color coding for alarm status (Red, Green, Yellow).
Procedure for acknowledging and clearing inactive alarm conditions.
Statement defining the limitations and conditions of the product warranty.
Essential safety instructions for performing maintenance tasks, including PPE and power disconnection.
Lists periodic maintenance tasks with recommended time intervals.
Specifies the type and properties of grease required for lubrication.
Crucial safety steps: disconnect power and allow lamp to cool before proceeding.
Step-by-step guide for safely removing and installing a new lamp.
Instructions for adjusting panel settings after the lamp has been replaced.
Information on modifying the alarm limit for the lamp's operational hours.
Safety warnings related to UV radiation and hot components during operation.
Guidance on the proper disposal methods for used lamps.
Diagnosing and resolving problems with searchlight movement and illumination.
Troubleshooting steps for focus, communication, and joystick command issues.
Steps to diagnose and address battery-related errors.
Instructions for replacing the battery within the PLC unit.
Procedure for removing and professionally disposing of the panel's battery.
Procedure for removing and professionally disposing of the searchlight's battery.
Important information clarifying the battery's role in firmware preservation.
Information on how to obtain technical data sheets for the battery.
Statement detailing what is excluded from warranty coverage.
Instructions on how to initiate and manage a warranty claim.
List of assigned IP addresses for searchlights, panels, controllers, and antennas.
Guides on assembling and specifications for standard LAN cables.
Emphasizes the importance of correct shield connection for reliable LAN cable performance.
To Next Page
