Need help?Do you have a question about the NORSELIGHT XS 3000 R60 and is the answer not in the manual?
General| Input Voltage | 100-277V AC |
|---|---|
| Power Consumption | 300W |
| Luminous Flux | 42000 lm |
| Color Temperature | 6000K |
| Power | 300 W |
| Frequency | 50/60 Hz |
| Lamp Type | LED |
| Lamp Life | 50000 hours |
Details the construction of the searchlight unit, including materials and lamp housing components.
Explains the features of the Main Operation Panel R60/R50 and the Slave Operation Panel.
Lists available software features and hardware options for customization.
Covers IP classification, ambient temperature, movement ranges, and color.
Details technical specs for various power supply models like EX-30 G/1, PX-50N, N3-80E.
Provides overall dimensions of searchlights and electrical cable entry specifications.
Shows dimensional drawings for EX-30 G/1 and PX-50N power supplies.
Explains setting parameters like Pmax, Imax, Imin for Xenon lamps.
Illustrates the menu flow for setting lamp parameters via the control panel.
Describes how to shift between manual and remote operation modes.
Shows the program menu flow for parameter mode setting.
Wiring diagram for the R60 XS1000 with integrated power supply.
Wiring diagram for R60 XS500-3000 searchlights.
Electrical connection diagram for Panel R60 remote unit.
Wiring diagram for the EX-30G/1 power supply for 500W lamps.
Wiring diagram for the PX-50N power supply for 1000W lamps.
Wiring diagram for the NP-0725 power supply (500-1000W).
Wiring for N3-80E (1600-2000W) and N3-150E (3000W) power supplies.
Wiring diagram for the EX 100-D/1 power supply (1000-3000W).
Steps for first start-up, power loss reset, and software configuration.
Guides users through setting up hardware parameters like orientation.
Explains settings for the slave panel, including direction and speed.
Details operation and settings for different joystick types.
Explains how to use the main Home menu for searchlight control and selection.
Guides on setting sector limits, sweep ranges, and home positions.
How to access help menus and view I/O information for troubleshooting.
Explains how to read and acknowledge different alarm statuses.
Lists part numbers for various components across different searchlight models.
Step-by-step instructions for safely replacing the Xenon lamp.
Procedure for addressing battery errors and replacing the PLC battery.
Specific instructions for replacing the battery within the searchlight unit.
Solutions for problems like movement failure, no light, or focus errors.
To Next Page
