Nortek Security & Control MIGHTY MULE MM571W - User Manual

Copyright
©
2019 Nortek Security and Control, LLC. 10022116 A
Mighty Mule
®
is the retail brand of Nortek Security and Control, LLC.
This product meets the requirements of UL325, the standard for gate operator safety.
Installation Manual
(For a single or dual gate installation)
Horizontal Support
Gate Swings Evenly and Freely
Hung Firmly and Plumb
Post Bracket
Control Box
Fence Post Set in Concrete Fence Post Set in Concrete
Run 1000' (max.) of low voltage
wire to control box from
transformer (wire not included).
Power Cable
PVC conduit (not included)
to protect wire from lawn
mowers and weed eaters.
PVC conduit (not included)
to run second opener power
cable under driveway.
Gate Bracket
Warning Sign
Secondary Opener
Primary Gate Opener
Horizontal Support
Post Bracket
Gate Bracket
Warning Sign
120 Volt indoor
Transformer
(surge protector
not supplied)
Example of Dual Gate nished installation
(Installations vary slightly on different types of gates)
MM571W
MM572W
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,MM571W & MM572W - P/N: 10022116 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - TOLERANCE: ± .125” - FOLDING: ALBUM FOLD - BINDING: SADDLE STITCH - SCALE: 1-1
Single gate installation [MM571W]
Dual gate installation MM572W]

Summary

Product Usage

Important Safety Information

Please Read This First!

Introductory section with crucial safety and operational guidelines.

I. Before Installation

Crucial steps to verify gate suitability and condition before installation begins.

II. During Installation

Guidelines for physically installing the gate operator on the property and gate.

III. After Installation

Installing Warning Signs and Pedestrian Gates

Required Safety Precautions for Gates

Essential safety measures and considerations when installing and using automatic gates.

Mechanical Installation

Pull-to-Open Operator Mounting

Pull-to-Open Operator Mounting (Most Common)

Detailed steps for installing the operator arm and brackets for pull-to-open gate configurations.

Push-to-Open Operator Mounting

Push-to-Open Operator Mounting

Detailed steps for installing the operator arm and brackets for push-to-open gate configurations.

Control Box Installation

Connecting the Operator(s) and Battery

Transformer or Solar Panel Wiring Installation

Electrical Installation and Setup

Transmitter Programming

How to Learn a Transmitter

Operator Limit Setting

Setting Operator Limits

Procedures for setting extended, closed, and open travel limits for gate operators.

Dual Sense Stall Force Setting

Adjusting the force sensitivity for obstruction detection and reversal.

Connecting Additional Devices

Maintenance

Troubleshooting Guide - Audible Feedback

Troubleshooting Guide - Visual Feedback

Gate Operator Installation Checklist

Nortek Security & Control MIGHTY MULE MM571W Specifications

General

Type	Swing Gate Opener
Battery	Yes
Solar Panel Compatibility	Yes
Weather Resistant	Yes
Maximum Gate Weight	850 lbs
Smart Control	Yes
Battery Type	12V DC
Remote Control	Yes
Gate Type	Single or Double Swing Gate
Safety Features	Obstruction sensing, reversing system
Warranty	12 month limited