To Next PageTo Next Page
Need help?Do you have a question about the Nortek B-HW-2.2(07)-A3AK and is the answer not in the manual?
Details safety symbols, warnings, and notices for user awareness and hazard avoidance.
Identifies and illustrates the primary components of the indoor unit for user familiarity.
Specifies the performance parameters and temperature ranges for cooling and heating modes.
Specifies required space around the unit for proper installation and airflow.
Guidelines for selecting and installing communication wiring between units and controllers.
Details on choosing communication lines for indoor units and wired controllers, including diagrams.
Guidelines for selecting communication lines connecting indoor units to the outdoor unit.
Information on power supply, wiring, and electrical connections for safe and compliant installation.
Procedures and dimensions for mounting the indoor unit securely on the wall.
Steps for securely attaching the rear panel to the wall using bolts.
Steps for setting the master indoor unit and initial troubleshooting of system errors.
Instructions for creating the wall opening for refrigerant piping and wiring passage.
Proper method for installing the drain hose for effective water removal during operation.
Guidance on connecting refrigerant pipes securely, avoiding bending and over-tightening.
Detailed instructions for stripping wires and making secure connections to terminal boards.
Safe and correct procedure for connecting the unit's main power cord.
Steps for connecting communication lines between the indoor unit (IDU) and outdoor unit (ODU).
Procedure for connecting the communication line of the wired controller to the indoor unit.
Information on connecting multiple indoor units to a wired controller network.
Mounting the indoor unit and routing piping/wiring from the sides, ensuring secure hanging.
Instructions for removing, cleaning, and reinstalling the front panel of the unit.
Guide on cleaning air filters periodically for optimal air quality and unit performance.
Essential checks to perform before the start of the cooling or heating season for proper operation.
Maintenance steps to take after the end of the usage season, including cleaning and power cutoff.
Conditions requiring professional service and initial troubleshooting steps before calling for support.
Guidance on seeking support, repairs, and service after the product has been purchased.
How to control the vertical louvers for swing or fixed airflow direction using the remote.
Methods for manually adjusting horizontal louvers to direct airflow across the room.
General