Nortek Door-Gard 212iLM User Manual

6-051344 X2 1
212iLM Keypad Installation & Programming
PRINTER’S INSTRUCTIONS:
INSTR/PROG,212ILM-AL/212ILM-BZ - P/N: 6-051344 X2 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: FLAT 17.000” X 11.000” FOLDED 8.500” X 11.000” - TOLERANCE: ± .125” - SCALE: 1-1
Specifi cations
Case Dimensions:
6-1/2” L x 1-3/4” W x 1-1/8” D
Electrical:
Voltage: 12-24 VAC/DC
Current:
53mA@12VDC
72 mA @ 24 VDC
95 mA@12 VAC
108 mA @ 24 VAC
Relay Contacts:
Main Relay (controller): 2 Amps
Bell Relay:
Form A; 1 Amp @ 30 VAC/DC
Environmental:
-20º F to 130° F
For Indoor and Outdoor Use
Features
● 120 User Capacity
● Programmable Relay Time (0 to 99 seconds)
● Request to Exit (REX) Input
● Vandal Resistant Case
● Sealed for Indoor or Outdoor Applications
● LED’s for Relay Status Indication
● Bell Output
● Surface Mount
● Illuminated Hardened Keys
● Rated for Greater than One Million Key Cycles
Applications
● Low to Medium/Heavy Traffi c Areas
● Rough Service Environments
● Mullion Frame Mounting
● Dimly Lit Areas
Description:
The Door ♦ Gard Series 212iLM keypad combines
elegant looks with a mullion mount design in a rugged,
vandal resistant case, which you can use for almost
any application. The 212iLM has hardened backlit keys
designed to perform in medium to high traffi c areas and
in rough duty environments. The electronics are also
conformal coated, which makes the keypad suitable for
indoor or outdoor applications.
Basic Operation:
To gain access through the door enter your code
(1-6 digits) followed by the ✱ key on the keypad.
Packing List:
(1) 212iLM Keypad
(1) Eight-Conductor Wire Harness
(1) Mullion Hardware Pack
(1) 5/64” Allen Wrench
(1) Anti-Oxidant Grease Pack
(1) Installation/Programming Manual
Wire Harness Confi guration:
Pin Wire Color Signal Name
1 Red Power (+)
2 Black Power (-)
3 White/Black REX
4 White/Yellow Main Relay NC
5 Blue Main Relay Common
6 Brown Main Relay NO
7 White Bell Relay Contact (A)
8 White Bell Relay Contact (B)
212iLM Keypad
Installation & Programming Instructions
Note: This product is designed to be installed and serviced
by security and lock industry professionals.

Nortek Door-Gard 212iLM Specifications

General

Brand	Nortek
Model	Door-Gard 212iLM
Category	Keypad
Language	English

Summary

Product Specifications and Features

Specifications

Details product dimensions, electrical requirements, and environmental ratings.

Features

Lists key capabilities including user capacity, relay time, and case design.

Applications

Identifies suitable environments and traffic levels for keypad usage.

Wire Harness Configuration

Provides a pinout and wire color guide for connecting the keypad.

Keypad Installation and Mounting

Keypad Installation Procedure

Step-by-step guide for physically installing the keypad onto a mounting surface.

Keypad Mounting Height

Recommends an appropriate height range for mounting the keypad.

Wiring Diagrams for Access Control

Wiring an Electromagnetic Lock (Maglock)

Illustrates connections for integrating the keypad with a maglock system.

Basic Access Control Using an Electric Door Strike

Shows wiring for connecting the keypad to an electric door strike.

Advanced Wiring Configurations

Shunting a Normally Closed Zone

Details wiring for shunting alarm contacts with the keypad.

Wiring a Request to Exit Device (REX)

Explains how to connect a REX device to the keypad.

Bell Output Wiring

Wiring the Bell Output to a Speaker

Shows connections for using the keypad's bell output to trigger a speaker.

Keypad Programming

Programming the 212iLM Keypad

Instructions on entering programming mode and default settings.

Programming Options Chart

Details commands and keys for various programming options and settings.

Programming Examples and Indicators

Programming Examples

Illustrates common programming tasks like changing master code and adding users.

LED Indications

Describes the meaning of different LED states on the keypad.

Troubleshooting and Testing

Troubleshooting

Addresses common issues like LED behavior and access to programming mode.

Testing the Keypad

Provides instructions for performing a self-test on the keypad.

Program Mode Loopback

Program Mode Loopback Procedure

Explains how to enter program mode if the local code is forgotten.

Limited Warranty Information

Limited Warranty

Outlines the terms and conditions of the product warranty.

Mounting Template

212iLM Mounting Template

Provides a physical template with dimensions for drilling mounting holes.