Need help?Do you have a question about the Nortel BayStack 5520-48T-PWR and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Model | BayStack 5520-48T-PWR |
| Enclosure Type | Rack-mountable |
| Power over Ethernet (PoE) | Yes |
| PoE Standard | IEEE 802.3af |
| Switching Capacity | 176 Gbps |
| Layer | Layer 3 |
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Jumbo Frame Support | 9216 bytes |
| Storage Temperature | -25 °C to 70 °C |
| Redundant Power Supply | Optional |
| Device Type | Switch |
| Ports | 48 x 10/100/1000 + 4 x SFP |
| Routing Protocol | RIP-1, RIP-2, IGMP, VRRP, OSPF, PIM-SM, PIM-DM |
| Remote Management Protocol | SNMP 1, Telnet, SNMP 3, HTTP |
| Features | Flow control, VLAN support, Quality of Service (QoS), DHCP support, port mirroring, trunking, IPv6 support, auto-negotiation, ARP support, manageable, MAC address filtering, IPv4 support, BOOTP support |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1s, IEEE 802.3x, IEEE 802.1x |
| Dimensions (H x W x D) | 4.4 cm x 44 cm x 30 cm |
| Operating Temperature | 0 - 50 °C |
| Power Supply | Internal |
| MAC Address Table Size | 32K entries |
Certifies compliance with international standards for electromagnetic compatibility and safety.
Details national statements regarding electromagnetic compliance including FCC, ICES, and CE marking.
Canadian statement on radio-noise emissions compliance for digital apparatus.
European statement on electromagnetic compatibility and low voltage directives.
Statements regarding compliance with national safety standards like EN 60950 and NOM.
Certification of compliance with EN 60950 standard under the Low Voltage Directive.
Information provided in compliance with the safety requirements of Norma Oficial Mexicana (NOM).
Details compliance with WEEE and RoHS directives for collection, recycling, and hazardous substances.
Statement on the ban of heavy metals and flame-retardants per RoHS Directive 2002/95/EC.
Product's subject to separate collection and treatment at end of life in EU Member States.
General safety warnings and precautions for handling and installing equipment.
Details new functionality enhancements and changes with the introduction of the 5600 Series switch.
Information on modifications made to align with Nortel Customer Documentation Standards.
Updates to the section detailing power options for the 5600 Series switches.
Information and procedures to prevent electrostatic discharge damage during installation.
Describes the various Ethernet Routing Switch 5000 Series models and their key features.
Details hardware features common to all 5000 Series switches.
Information about Type A and mini Type B USB ports on specific 5000 Series models.
Describes the environmental requirements for operating the Nortel Ethernet Routing Switches.
Details options for mounting switches on a flat surface or in a rack.
Procedure for mounting 5000 Series switches on a flat surface like a table or shelf.
Procedure for mounting 5000 Series switches on a wall.
Covers front and rear mounting options for installing switches in equipment racks.
Describes standalone and stacked configurations for 5000 and 5600 Series switches.
Describes a single switch operating independently.
Describes how to connect multiple switches into a stack.
Details the cascade down (stack down) configuration for switch stacking.
Details the cascade up (stack up) configuration for switch stacking.
Explains different stack types and the role of the Unit Select switch.
Information on dual-path stacking for operational continuity and increased bandwidth.
Lists required cables and specifications for 5000 Series switches.
Shows how PoE capability per port depends on installed power supply modules.
Lists requirements like environmental conditions and placement options before installing.
Outlines the sequence of tasks for bringing the switch online.
Provides a task flow for placing the switch, leading to detailed placement methods.
Steps to prepare for installing a switch, including site preparation.
Procedure to verify that the installation area meets environmental requirements.
Procedure to compare package contents with the list to ensure all components are delivered.
Details various methods for mounting or placing a switch.
Steps to connect power sources to the switches.
Procedures to install the hardware and verify its installation.
Procedures to prepare switches for network connectivity.
Information necessary to configure IP address parameters on the switch.
Steps to configure a switch stack.
Procedure to abandon a command entered using the UI button.
Connector pin assignments for RJ-45 connectors on 5500 Series switches.
Pin assignments for the console port connection on 5500 Series switches.
Specifications for AC power cords for various countries.
Describes power specifications for power supplies in the 5500 Series.
To Next Page