Page 3
Note: Your telephone may not have access to all the features listed in this guide. This may be
because your telephone does not support the feature, or because the feature has not been
enabled at your telephone. Your system administrator can provide details.
Telephone button icons
The Business Series Terminal (T-series) Feature button is a small globe icon. The M-series
Feature button reads Feature or Fx. The IP telephones display
Feature above the far left
display key, when feature selection is available.
This book uses FEATURE to indicate pressing the Feature key before entering a feature
code. The table below shows which buttons to use on the different types of Nortel Networks
telephones to use the features. Refer to each user card for specific details about each type
of telephone.
Button
Function
Business Series
Terminals (T-series)
Legacy telephones (M-series)
IP telephones
(20XX)
Feature
,
Display key
Hold
,
, ,
Release
,
Answer call
Telephones with line buttons:
Press active line button or Intercom key and lift handset.
Telephones with no buttons:
Lift handset.
This guide uses the following labels to indicate each type of configuration button:
• FEATURE indicates pressing the Feature key
• HOLD indicates pressing the Hold key.
• RLS indicates pressing the Release key
To Next Page
Loading...
Need help?
General
