To Next PageTo Next PageWhat to do if my North Star PROVEN PERFORMANCE M1578112G engine will not start?
If the engine of your North Star Pressure Washer won't start, here are a couple of potential causes: * Low oil shutdown: Refer to the engine manual for oil requirements. * Engine starting instructions not followed: Consult the engine manual for starting instructions.
Why is my North Star PROVEN PERFORMANCE M1578112G Pressure Washer experiencing low or surging pressure, or no water flow?
There are several reasons why your North Star Pressure Washer might have low or surging pressure, or no water flow: * Insufficient water supply: Consult the water supply section of this manual. * Plugged pump inlet filter: Refer to the maintenance section of this manual. * Wrong nozzle: Ensure you are using the high-pressure nozzle. * Plugged nozzle: Remove the nozzle and check for blockages. * Worn nozzle: Replace the nozzle. * Leak in the pressure hose: Replace the pressure hose.
Why is there no chemical injection in my North Star PROVEN PERFORMANCE M1578112G Pressure Washer?
If your North Star Pressure Washer isn't injecting chemicals, it could be due to: * Wrong nozzle: Ensure you are using the correct chemical nozzle. * Back pressure from an extra-long discharge hose: Try using a shorter hose. * Leak in the chemical siphon hose: Replace the hose, using hose clamps if necessary. * Chemical strainer not submerged: Make sure the strainer is completely submerged in the chemical solution.
Imminently hazardous situation indicating potential death or serious injury.
Potentially hazardous situation indicating potential death or serious injury if not avoided.
Potentially hazardous situation indicating potential minor/moderate injury or property damage.
Emphasizes reading and understanding the manual for safe operation.
Warns about serious injury from high-pressure fluid injection.
Highlights dangers associated with flammable fuel and hot exhaust.
Alerts to the deadly risk of carbon monoxide fumes.
Safety precautions for handling and mixing cleaning chemicals.
Warns about the danger of electrical shock from water contact.
Advises wearing safety glasses due to flying particles.
Warns about slippery surfaces and maintaining balance.
Warning about potential burns from touching the hot muffler.
Lists the steps required to start the pressure washer.
Lists the steps required to safely shut down the pressure washer.
Guide to identifying and separating machine parts after unboxing.
Details the various components found in the hardware bag.
Instructions for assembling the unit's handle and related parts.
The part of the unit designed for easy cart movement.
Location for storing the pressure hose.
Connects the water source to the gun and unit.
Used to draw cleaning solution into the water stream.
Inspect this component for damage before use.
The power source for the pressure washer.
Location for storing the spray gun.
Attachments that determine spray pattern and pressure.
The device used to direct the high-pressure water stream.
Activates the flow of pressurized water.
Identifies components specific to pump model 1577543.
Identifies components specific to pump model 1578172.
Identifies components specific to pump model 1578173.
Identifies components specific to pump model 1578182.
Identifies components specific to pump model 1578203.
Identifies components specific to pump model 1578202.
Identifies components specific to pump models 1578112, 1577544.
Ensures adequate and clean water flow for pump protection.
Step-by-step guide for starting the pressure washer.
Step-by-step guide for safely shutting down the unit.
Mechanism to prevent accidental high-pressure discharge.
Instructions on how to securely connect the lance to the spray gun.
Proper procedure for attaching and securing spray nozzles.
How to connect hoses to the pump and spray gun.
Guide to safely using chemical solutions for cleaning.
Steps to put the unit into a safe state for maintenance.
A schedule of regular checks and maintenance tasks.
Detailed steps for draining and refilling pump oil.
Recommendations for storing the unit when not in use for extended periods.
Steps to protect the unit from freezing during cold weather.
Common causes and solutions for engine starting problems.
Diagnosing and fixing issues with water pressure and flow.
Troubleshooting why the chemical injector is not working.
Outlines the warranty duration for different product item numbers.
Details warranty for components subject to normal wear.
Specifies conditions and damages not covered by the warranty.
General| Brand | North Star |
|---|---|
| Model Number | M1578112G |
| Engine | Honda GX390 |
| Engine Displacement | 389 cc |
| Maximum Pressure | 4000 PSI |
| Pump Type | Triplex |
| Hose Length | 50 ft |
| Flow Rate | 4.0 GPM |
