Need help?Do you have a question about the NorthStar EXPLORER D210 and is the answer not in the manual?
General| Brand | NorthStar |
|---|---|
| Model | EXPLORER D210 |
| Category | Marine Equipment |
| Language | English |
Explains the meaning of DANGER, WARNING, and CAUTION alert symbols used in the manual.
Outlines the owner's responsibility and specifies the English version as official documentation.
Details FCC compliance for Class B digital devices and measures to correct interference.
How to enable or disable all alarms using the ON/OFF buttons and indicator arrow.
Instructions on how to set the shallow depth alarm, including setting value and exit procedures.
Instructions on how to set the deep depth alarm, including setting value and exit procedures.
How to set depth relative to the keel or water surface using offsets.
Adjusting transducer sensitivity to match different transducer types and improve echo reception.
How to select displayed units for depth (Feet, Metres, Fathoms).
Setting up instruments in a master/slave configuration for dual station operation.
Configuring linked or separate settings for dual station instruments, affecting shared settings.
Step-by-step guide for mounting the instrument panel, wiring power, and connecting the transducer.
Details on connecting the power terminals (Red/Black) and the optional external buzzer (Orange).
Information on using the Brown wire for NMEA data input/output as a repeater.
Steps to diagnose and resolve issues where the instrument display is blank.
Steps to diagnose and resolve issues where the instrument shows '--' for depth readings.
Causes and solutions for inconsistent depth readings when the vessel is stationary.
Causes and solutions for inconsistent depth readings when the vessel is underway.
Steps to resolve interference causing erratic readings when the engine is operational.
To Next Page