Need help?Do you have a question about the Norton Clipper C1418P and is the answer not in the manual?
Essential safety guidelines, hazard symbols, and warnings for operation.
Step-by-step guide for assembling the concrete saw components.
Technical details and dimensions for C1318P and C1418P models.
Engine checks and procedures for aligning the saw's pointer.
Procedure for correctly installing the saw blade.
Detailed steps for starting both Honda and Kohler engines.
How to connect water supply and operate the saw.
Guidelines for operating the saw and effective cutting methods.
Maintenance schedule and procedures for Honda and Kohler engines.
Relubrication of bearings and adjustment/maintenance of V-belts.
Maintenance procedures for the depth control mechanism.
Regular inspection and cleaning schedule for the machine.
Electrical wiring schematics for C1318P and C1418P models.
How to order replacement parts, including model and part numbers.
Detailed parts diagram and list for the depth control assembly.
Detailed parts diagram and list for the handle bar assembly.
Detailed parts diagram and list for the blade guard assembly.
Detailed parts diagram and list for the blade shaft assembly.
Detailed parts diagram and list for the belt tensioning mechanism.
Detailed parts diagram and list for the engine mount assembly.
Detailed parts diagram and list for the main frame assembly.
Detailed parts diagram and list for the water control system.
Detailed parts diagram and list for the front pointer assembly.
Identification of decals located on the operator's right side.
Identification of decals located on the operator's left side.
Identification of decals located on the front of the machine.
Identification of decals located on the rear of the machine.
Identification of decals located on the console.
Identification of decals on the belt guard and engine.
General| Blade Diameter | 14 in |
|---|---|
| Segment Height | 10 mm |
| Arbor Size | 1 inch |
| Application | masonry |
| Wet/Dry Cutting | Wet or Dry |
| Max cutting depth | 5 inches |
| No-load speed | 11, 000 rpm |
To Next Page