Need help?Do you have a question about the Norton GC55 and is the answer not in the manual?
General safety guidelines, fuel, hot components, rotating parts, and exhaust.
Warns about hazards from dust and silica, recommending PPE.
Key safety points for blade mounting and operating the saw.
Step-by-step guide for adjusting the handle bars for transport and use.
Procedures for checking and starting the GC55 model's engine.
Instructions for aligning the saw's front pointer for accurate cutting.
Guidelines for connecting the GC25E to power, including voltage and cords.
Step-by-step guide for safely mounting a blade onto the saw.
Explains the thermal reset function and causes of overheating.
Instructions for starting the gasoline engine on the GC55 model.
General guidance on operating the saw, including blade installation and engine starting references.
Instructions on adjusting depth and safely moving the saw.
How to lower the blade, push the saw, and manage stalling.
Specific considerations and techniques for cutting green concrete.
Maintenance schedule and procedures for the GC55 model's engine.
Guidance on selecting the correct engine oil viscosity and type.
Specific engine maintenance for dry cutting or dusty environments.
Information on lubricating and maintaining bearings for long life.
How to properly adjust and maintain V-belt tension.
How to use the turn handle and depth gauge to set cutting depth.
Steps to adjust the dust collection system for effective debris management.
How to order replacement parts, including model and part numbers.
Exploded view and parts list for the blade guard assembly.
Exploded view and parts list for the cutting head assembly.
Exploded view and parts list for the blade shaft assembly.
Exploded view and parts list for the depth control assembly.
Exploded view and parts list for the GC55 engine components.
Exploded view and parts list for the GC25E motor assembly.
Exploded view and parts list for the GC55 frame assembly.
Exploded view and parts list for the GC25E frame assembly.
Exploded view and parts list for the front pointer assembly.
Exploded view and parts list for the main GC55 assembly.
Exploded view and parts list for the main GC25E assembly.
To Next Page
General