ENGLISH
8
CLEANING & MAINTENANCE
1. Make sure the Electric Motor is turned o and the unit is unplugged.
2. Remove Electric Motor/Lid/Dasher by turning clockwise and lifting from Freezer Bowl.
3. Remove Dasher and Connecting Axis, and scrape o any excess ice cream.
4. Wash Freezer Bowl, Dasher, Connecting Axis and Lid using warm, soapy water and dry
thoroughly. DO NOT replace Lid with Electric Motor until the Freezer Bowl is completely dry.
5. Wipe Electric Motor with a soft cloth moistened with mild soap, then dry
thoroughly. NEVER immerse Electric Motor in water or other liquid.
6. DO NOT use harsh or abrasive cleaners.
7. DO NOT use an abrasive sponge, cloth or scouring pad on the unit.
8. DO NOT freeze the Freezer Bowl when it is wet.
9. ONLY wash unit by hand. DO NOT place parts in the dishwasher.
To Next Page
Loading...
Need help?
General
