ENGLISH
5
PARTS & ASSEMBLY
Take the RETRO SERIES™ ICE CREAM MAKER out of the box and wash
the Freezer Bowl, Lid and Dasher with warm, soapy water.
DO NOT wash the Electric Motor. Carefully wipe down the Electric Motor with a non-
abrasive cloth or sponge. NEVER immerse the Electric Motor in water. Dry thoroughly.
PARTS
ASSEMBLY
Electric Motor
Freezer Bowl
Dasher
Connecting
Axis
Lid
ON/OFF Switch
Ingredient Chute
STEP 1. Ensure unit is unplugged, then
t the Electric Motor into the Lid. Unit
will click into place when secure.
STEP 2. Fit the Connecting Axis into the
Dasher, then t the Dasher assembly into the
hole on the bottom of the Electric Motor.
STEP 3. Place the Electric Motor/Lid/Dasher
assembly onto the Freezer Bowl and turn
counterclockwise to lock into position.
STEP 4. You can now operate your ELECTRIC ICE
CREAM MAKER by using the ON/OFF Switch.
To Next Page
Loading...
Need help?
General
