PAGE - 22 Installation and operating manual UDS-4
NOTIFIER ITALIA Doc. M--203.1-UDS4N-ENG Rev A. 1 UDS-4_manu
5.11 - UTILITY MENU \ Date and Time \ Time
▪ Time hh:mmThis menu
item allows the time to be set. Repeatedly pressing the ENTER key selects the field to be modified,
while the UP and DOWN arrows are used to set the value. A further press of the ENTER key, from the
minute selection, allows the time to be confirmed.
5.12 - UTILITY MENU \ Historical Archive
◦ Events / Size= nnn/NNThis
menu item displays the number of stored events and the total number of storable events, i.e. the size of
the event history archive.
5.13 - UTILITY MENU \ Historical Archive \ Visualisation
◦ Start Date DD/MM/YYYYY menu
item allows you to set the start date and time of the time interval within which the events occurred.
◦ End Date DD/MM/YYYYY menu
item allows you to set the end date and time of the time interval within which the events occurred.
◦ Alarms
YES, [NO|YES]
Filter for displaying (YES) or not (NO) of Alarm events.
◦ Configuration
YES, [NO|YES]
Filter for displaying (YES) or not displaying (NO) the Configuration events.
◦ Exclusions
YES, [NO|YES]
Filter for displaying (YES) or not displaying (NO) Exclusion events.
◦ Faults
YES, [NO|SI]
Filter for displaying (YES) or not displaying (NO) Fault events.
◦ Other
YES, [NO|SI]
Filter for displaying (YES) or not (NO) the events not included in the previous filters such as, for example,
the input event or the output of the operator together with the corresponding switched-on level.
◦ ViewPressing
this menu item accesses the display of events that meet the filter settings defined above.
5.14 - UTILITY MENU \ Historical Archive
◦
ClearingPressing this menu item asks you to confirm the deletion of the historical archive. Then press
ENTER again to clear the entire history archive.
5.15 - UTILITY MENU \ Historical Archive \ Disable
◦ Disable NO, [NO|YES]
This menu item allows you to enable (YES) or disable (NO) the storage of events in the historical archive.
5.16 - UTILITY MENU \ Historical Archive
◦ Event log savingPressing
this menu item prompts you to insert the USB stick. After insertion, the copying of the event log is started.
The end of the copy is indicated by an information window.