NOVAK 828-HV - User Manual

Lists key features of the 828-HV ESC, including thermal protection, low on-resistance MEGAFET transistors, and regenerative braking.

Details technical specifications such as case size, weight, current ratings, voltage input, PWM frequency, and wire size.

Advises on heat sinks, battery disconnection, transmitter use, specifications, and avoiding water or accidental short-circuits.

Explains how to convert the input harness to be compatible with various radio systems using the Novak Input Plug System.

Details the correct procedure for installing heat sinks on transistors to prevent overheating and voiding the warranty.

Guides on mounting the ESC and On/Off switch for optimal airflow and accessibility on the chassis.

Covers motor capacitor installation, Schottky diode connection, input harness, battery pack, and power wires.

Explains the necessity of an external receiver battery pack when using more than 13 cells to prevent BEC overheating.

Provides specific transmitter settings for various radio systems, including ATV, EPA, ATL, and trim adjustments.

Details the procedure for adjusting the NEUTRAL and HI SPEED pots using the ESC's LEDs and transmitter throttle.

Lists common ESC issues like dead motor/servo, motor stuttering, slow acceleration, and fading brakes with potential causes.

Outlines warranty terms, service costs, what to send for repair, and contact information for Novak Electronics.