37
Something not working?
Problem Possible cause
• The dryer does not work:
•
The door(s) has (have) not been closed.
•
The plug is not properly inserted in the power socket.
•
There is no current at the socket.
•
The main fuse or the fuse in the plug has blown.
•
The selector dial is not set correctly.
•
The water reservoir is full or not properly inserted (the
B
e
h
ä
lter light is on). The programme starts in any
case but it stops after approx. 4 minutes.
•
The
Start/Pause
Button has not been depressed.
•
The Zeitvorwahl option has not been selected.
• The dryer does not dry properly:
•
The laundry has not been spun properly.
•
The filters and/or the condenser are clogged up.
•
The water reservoir is full.
•
The room temperature is too high.
•
The selected time or drying cycle was not suitable for
the laundry.
•
The Schonen button has been pressed.
•
There is too much laundry inside the appliance.
•
The dryer is not correctly installed.
Before contacting your local Service Centre, please make the following checks:
If, after the above checks, there is still a fault, call your local Service Centre.
Please make sure you give the model and serial number of the appliance.
This information can be found on the rating plate
To Next Page
Loading...