Novar ED&S Karizma Plus User Manual

Intruder alarm system
Operating instructions
Introduction
The purpose of this user guide is to describe how to operate Karizma plus system. Some of the features
described in this guide may not be applicable to your installation and should be ignored. The engineer from the
alarm company will have completed the System Information Sheet (SIS) in this guide which gives information
specific to your installation. You will need to refer to this as you read this guide in order to check if certain
features have been used. If in any doubt consult your alarm company.
Alarm company (Installer) name: __________________________________________
Telephone number: _____________________________________________________
Account number: _______________________________________________________
Installation date: _______________________________________________________
1
Karizma
Plus
TM

Novar ED&S Karizma Plus Specifications

General

Brand	Novar ED&S
Model	Karizma Plus
Category	Security System
Language	English

Summary

Keypad and Entry Code Operations

Understanding the Keypad Layout

Explains the physical layout of the Karizma+ keypad and the function of its keys.

Types of Entry Codes

Details the different entry codes (Normal, Manager, Cleaner, Duress) and their access levels.

Setting the Alarm System

Fully Setting the System

Procedure for setting the entire alarm system when vacating premises.

Part-Set the System

How to set only parts of the system using programs B or C.

Performing a Quick-Set

Omitting Detection Points During Setting

Unsetting the Alarm System

Alarm Handling and System Reset

Silencing an Alarm

How to silence an active alarm by entering a code.

Resetting After an Alarm

Procedure to reset the system after an alarm event has occurred.

Fault Management and Remote Reset

Understanding Fault Lockout

Remote Reset Procedures

Reset by Anti-code

Manager Facilities and Menu Options

Menu 1: Set System

Menu 2: View Event Log

User and Point Configuration Menus

Menu 4: Change User Type and Name

Menu 5: Change User Code

System Configuration and Time Settings

System Testing Menus

Menu 9: Walktest

Perform a walktest to verify the operation of all security points.