To Next PageTo Next Page
Need help?Do you have a question about the Novar ED&S LS400 and is the answer not in the manual?
Lists all components included in the alarm system kit.
Lists the tools necessary for installing the alarm system.
Highlights the key functionalities and technologies of the LS400 alarm system.
Provides guidance on selecting optimal locations for the Control Unit and detectors.
Demonstrates sample layouts for protecting different areas of a house.
Step-by-step instructions for mounting and wiring the main Control Unit.
Detailed guide on mounting and wiring the PIR motion detectors.
Instructions for installing magnetic contacts on doors and windows.
Steps for mounting and wiring the external siren unit.
Procedures for testing detectors and the external siren after installation.
Explains the purpose and function of User and Duress PINs for system access.
Guide on how to change default User and Duress PINs for enhanced security.
How to configure zones to produce a chime sound when triggered in OFF mode.
Setting zones to be inactive in HOME mode but active in OUT mode.
Permanently disabling specific zones from activating the alarm in any mode.
How to view which zones are currently set as bypassed.
Checking for zones that have detected faulty or disconnected devices.
How to view which zones are currently set as Home-Bypass.
Configuring the entry and exit delay times for arming and disarming the system.
Adjusting how long the alarm siren sounds when triggered.
Activating and exiting the system's walk test mode to verify detector operation.
Resetting illuminated zone indicators after an alarm event.
Activating an immediate alarm manually for emergencies.
Procedures for silencing an active alarm and its associated indicators.
Arming the system when leaving the premises, including exit delay.
Disarming the system upon entering the premises, using the entry delay.
Arming the system in HOME mode, allowing movement within the premises.
A table summarizing zone behavior in HOME and OUT modes.
Overview of default system configurations and their manual references.
Explains the meaning of illuminated and flashing status LEDs on the control unit.
Common issues and solutions related to the main control unit.
Troubleshooting steps for problems encountered with PIR motion detectors.
Solutions for issues with door/window magnetic contact sensors.
Diagnosing and resolving problems with the external siren unit.
Technical specifications for the LS400 alarm system's control unit.
Technical specifications for the PIR motion detectors.
Technical specifications for the magnetic contact detectors.
Technical specifications for the external siren unit.
General| Brand | Novar ED&S |
|---|---|
| Model | LS400 |
| Category | Security System |
| Language | English |
