NovaStar VX4S-N User Manual

Details the buttons, screen, and connectors on the front panel of the VX4S-N controller.

Details the input and output connectors, including their types and specifications, on the rear panel.

Details how to set the resolution for various digital input source signals using preset or custom methods.

Explains the configuration of screen parameters like cabinet quantities, data flow, and precautions.

Provides instructions for adjusting the display brightness level of the controller.

Explains different modes for outputting images, including disabling scaling, auto fit, and custom scaling.

Describes how to use multiple VX4S-N units for large screen display configurations using equal or unequal division.

Details the configuration and layout options for Picture-in-Picture functionality, including source selection and cropping.

Allows setting the controller as primary or backup in a system configuration for enhanced reliability.

Save configuration presets and assign functions to the programmable Fn button for quick access.

Guides on controlling audio input, volume levels, and selecting audio modes for different sources.

Covers automatic VGA adjustment, ADC calibration, and video synchronization for optimal signal processing.

Manages display modes like normal, blank out, freeze, and test patterns for screen management.

Sets up backup input sources to automatically switch in case of primary signal failure for enhanced reliability.

Allows users to set the resolution for monitoring the output signals of the controller.

Covers loading and saving cabinet configuration files using NovaLCT-Mars software for screen setup.

Resets the controller to its original factory default settings to resolve issues or start fresh.

Configures network and USB communication parameters for device control and connectivity.

Adjusts OLED display brightness and views hardware version information for the controller.

Allows switching the user interface language of the controller to the preferred option.