Need help?Do you have a question about the NovaStar VX600 and is the answer not in the manual?
General| Model | VX600 |
|---|---|
| Category | Controller |
| Genlock Input/Loop | Yes |
| Input Interfaces | HDMI, DVI, DP, SDI |
| Output Interfaces | HDMI, DVI, DP, SDI |
| Control Interfaces | Ethernet, USB |
| Operating System | Unspecified |
| Power Supply | AC 100-240V~ 50/60Hz |
| Humidity | 10% to 90% non-condensing |
| Storage Temperature | -20°C~60°C |
Explains navigation using the knob and ESC, including front panel locking/unlocking and shutdown precautions.
Covers screen setup, config files, saving to RV card, color settings, frame rate, and mapping.
Guides on configuring regular LED screens using cabinet quantities and data flow settings.
Explains updating cabinet configuration files via NovaLCT to resolve issues like unlit screens.
Covers settings for Main, PIP1, PIP2 layers (status, input, scaling, size, position, priority, crop, opacity).
Explains switching layer input sources via front panel buttons or menu operations.
Covers input configuration: resolution, color, color space, color range, and mosaic sources.
Explains setting input resolution (standard/custom) for HDMI and DVI inputs.
Covers saving, loading, clearing, and copying presets to store/recall layer and related information.
Explains using mosaic for screens larger than a single unit's capacity, requiring multiple devices.
Encompasses device backup, input backup, synchronization, HDMI output, audio, HDCP, low latency, OPT 2 mode.
Details setting up backup between two devices for seamless operation if one fails.
Explains setting backup between two input sources for display continuity if one source fails.
Describes selecting a sync signal for cascaded units or primary/backup devices for in-sync output.
Covers Fn shortcut, return to home time, diagnostics, and device information.
Allows resetting all or partial device parameters to factory defaults.
Allows selection of Video Controller, Fiber Converter, or Bypass working modes.
Details connecting the device and performing firmware updates using V-Can software.
To Next Page
