NovaStar VX600 - Device Backup and Restore; Device Backup Procedure; Device Restore Procedure

VX600 All-in-One Controller User Manual
www.novastar.tech
43
7 Device Backup/Restore
Device Backup
You can back up the device configuration to your local computer and restore it when needed.
Prerequisites

You have made the necessary device configuration.

You have connected the device to the control PC with V-Can installed via the Ethernet cable.
Operating Procedure
Step 1 In V-Can, go to System > Backup to open the backup window.
Step 2 Click Export.
Step 3 Select a local path to save the backup file.
Step 4 Enter a name for the backup file.
Step 5 Click Open to complete the backup.
Note:
The default name of the backup file is "Device model-YMD-hour-minute-uback.img". You can rename the file,
but you cannot change the filename extension.
Device Restore
You can restore the backup information on your local computer to the device for quick device configuration.
Prerequisites

You have connected the device to the control PC with V-Can installed via the Ethernet cable.

There is a device backup file on the control PC.
Notes
After the restoration, the device will restart automatically.
Operating Procedure
Step 1 Go to System > Restore to open the restore window.
Step 2 Click Import.
Step 3 Select a local path to save the backup file.
Step 4 Enter the backup file name.
Step 5 Click Open to complete the restoring.
XI'AN NOVASTAR TECH CO., LTD.