To Next PageTo Next PageWhat to do if my NovaTec NovaWheel NW-800 Dryer unit is not running?
If your NovaTec Dryer unit isn't running, the control main circuit breaker might have tripped, the main power could be off, or the control power might be interrupted. Try resetting the breaker. Also, check the line and main power supply, and inspect each item according to the electrical wiring diagram.
Why is the material in my NovaTec NovaWheel NW-800 Dryer hopper not getting dried properly?
If the material in your NovaTec Dryer hopper isn't drying properly, it could be due to several reasons. The door gasket might be leaking or damaged, there could be a leak in the hose, or the hose connection might be loose. Also, the process temperature might be incorrect for the material being dried, or the hopper might be running almost empty. Check all gaskets (filter cover, hopper doors, and hopper lids) and repair or replace any damaged gaskets. Replace the hose and tighten hose connections. Add material to the hopper to maintain a higher level.
General
