NOVATIO Ex-Power 2000 - Page 7

1. Engage E
-Start connector.
2. Turn FUEL TANK CAP VENT LEVER to ‘ON’
position.
3. To start a cold engine, turn choke lever to the
CLOSED position. To restart a warm engine, leave
choke lever in CLOSED position. If difficult to start,
try in OPEN position
4. Ensure correct fuel is selected.
NOTE: Fuel type must be selected before
generator is powered on.
5. Turn ENGINE SWITCH to ‘ON ’ position. Indicator
lights on UIB may briefly flash.
6. Press E
-Start Power Button to start generator.
STARTING ENGINE (USING E-start*)
*applies to generators equipped with E-Start
7
⁂
**
**DF2 option available only on generators equipped with Diesel mode
⁂ WAIT or TEMP