22
English
19
Status Bar: displays various status messages.
20
Virtual Deck: rotates during playback.
21
Tempo-Matching Display: displays tempos of both Decks to help the mixing process.
22
Beat-Matching Display:
23
Waveform:
the bottom is that on Deck B.
24
Track Overview: an overview of the currently loaded track’s entire waveform.
25
Track Name:
26
Artist Name:
27
Key:
28
BPM Field / Tap:
to prompt you to tap out a suggested tempo.
29
Time Elapsed / Time Remaining: displays the current position of the Audio Pointer in the
track, either in terms of elapsed or remaining time. Click to toggle between the two.
30
Pitch:
37
31
Clock: display the computer’s internal real-time clock
32
Playback Mode:
automatically play the next track in the Crate when one track ends. This setting remains the
same even when a new track is loaded.
33
Repeat Mode: toggles Repeat Mode On/Off for the track (when Playback Mode is set to
loaded, Repeat Mode defaults to OFF.
34
Loop Range: displays the range of any currently selected Auto Loop or Loop Roll.
35
Rescan ID3 Tags:
Tip:
36
Relocate Lost Files:
37
Effect:
browsing for a different effect to apply to the Deck, the name of the effect will be shown in
38
FX Mix: the amount of current effect.
39
Parameter: the parameter for the current effect, which can be adjusted with the parameter
knob. Generally, this is the intensity of the effect but may vary between effects.
40
Tempo Source: the current BPM for the track, which helps determine the speed of the
holding down TAP TEMPO.
To Next Page
Loading...