EasyManua.ls Logo

Novation TWITCH - Mixer Settings Tab; General Mixer Settings; Cue Settings; Fader Curves

Novation TWITCH
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
English
MIXER Tab
GENERAL
CROSSFADER
NormalReverse
Disabled (the crossfader is disabled).
EQ
OUTPUT - allows you to set the audio output to be mono or stereo.
HEADROOM – sets how much headroom your device has before the internal limiter acts.
Less headroom results in louder output, but has a greater chance of the limiter acting,

0 dB you can apply 3dB of gain per deck before the limiter starts working.
CUE
Overdrive - increase this setting to give the level at the headphones output an extra boost. To
prevent hearing damage, be careful not to set the level too high.
NOTE: Adding overdrive can reduce audio quality so is only recommended if you are
encountering problems with your headphone level.
FADERS
C/F Curve
for a more gradual fade
U/F Curve
and clockwise for a more gradual fade.

Related product manuals