Novitek EXCLUSIVE - User Manual

Questions and Answers

T
Tamara GutierrezAug 3, 2025
How to fix cloudy water in my Novitek Hot Tub?
- A
  Albert ChambersAug 3, 2025
  Cloudy water in your Novitek Hot Tub can be due to several reasons. It could be caused by a dirty filter, so try cleaning it. Also, check if the pH value is within the recommended range and adjust it if necessary. Insufficient use of cleaning chemicals can also lead to cloudiness, so add a cleaning chemical to the water. If the water is too old or has been used excessively, consider replacing it.
N
nbrooksAug 7, 2025
Why does my Novitek EXCLUSIVE smell like chlorine?
- S
  Stephanie LarsenAug 7, 2025
  A chlorine smell in your Novitek Hot Tub may indicate that the chlorine level is too high; in this case, wait for it to decrease. It can also be caused by a water pH level that is too low, so adjust the water pH level to the recommended range.
B
Bradley MillerAug 11, 2025
What causes irritated skin from my Novitek EXCLUSIVE?
- C
  Cole TaylorAug 11, 2025
  Irritated skin after using your Novitek Hot Tub can occur due to unhygienic water, so you should add a cleaning chemical to the water. High free chlorine levels (over 5 mg/l) can also cause irritation, so wait for the free chlorine levels to drop.
S
Sarah MartinezAug 16, 2025
How to get rid of algae growth in my Novitek EXCLUSIVE?
- B
  Brittany NguyenAug 16, 2025
  Algae growth in your Novitek Hot Tub can be caused by a water pH level that is too high, so adjust the water pH level to the recommended range. Also, adding a cleaning chemical to the water may help.
R
robert05Aug 20, 2025
What to do for musty smell in Novitek EXCLUSIVE?
- S
  Sheila PetersonAug 20, 2025
  If your Novitek Hot Tub has a musty smell, it could be due to bacterial or algae growth. To resolve this, empty, clean, and refill the pool.
Z
Zoe HendersonAug 25, 2025
What causes patches on the surface of my Novitek Hot Tub?
- E
  Eric JacobsonAug 25, 2025
  Patches on the surface of your Novitek Hot Tub can be caused by a total alkalinity of water that is too low, or a water pH level that is too low. In either case, adjust the water pH level to the recommended range.
J
Jordan HaleAug 29, 2025
How to remove organic layer from Novitek Hot Tub?
- L
  Larry MckayAug 29, 2025
  An organic layer in your Novitek Hot Tub is usually due to accumulated oil and dirt. You can wipe the dirt away with a clean sponge.

Summary

Safety Guide

General Safety Precautions

Essential safety guidelines for using the hot tub, including supervision, electrical safety, and health considerations.

Installation and Startup

Installation Site Options

Details on installing the hot tub on the ground, terrace, sunken into a terrace, or indoors.

Pool Startup and Electrical Setup

Step-by-step guide for filling the pool, connecting power, and initiating the startup sequence.

Clearing Air Locks

Procedure to resolve air lock issues affecting jet functionality.

Pool Maintenance and Water Care

General Maintenance and Cleaning

Basic maintenance practices including cover usage, cleaning, and water replacement recommendations.

Filling and Emptying the Pool

Instructions for filling the pool with water, ensuring proper water level and preventing airlocks.

Water Care Systems

Details on the fiber filter, ozonization system, and cleaning chemicals for water quality.

Water Care Troubleshooting

Guide to common water care problems, their causes, and solutions for maintaining clear and healthy water.

Seasonal Use and Protection

Information on year-round use, frost protection, power outages, and preparing for winter.

Select Premium;Exclusive (ST2 T) Control Panel

Main View and Symbols

Overview of the main display screen, showing temperature, status, and function modes.

Navigation and Basic Settings

Instructions on how to navigate the control panel using touch screen icons and menus.

Time, Temperature, and Jets

How to set the time, adjust water temperature, and operate the jet pumps.

Modes, Service, and Ranges

Explanation of pool modes, service mode activation, and setting temperature ranges.

Filtration and Cleaning Cycles

Configuration of automatic filtration and cleaning cycles for maintaining water quality.

Advanced Features and Errors

Details on M8 feature, display rotation, units, technical settings, and timed messages.

Error Code Reference

A comprehensive list of error codes, their meanings, and required actions for troubleshooting.

Select Basic (TP700) Control Panel

TP700 Main View and Symbols

Overview of the TP700 main display, showing temperature, time, and modes.

TP700 Navigation and Basic Controls

Instructions for navigating the TP700 control panel using buttons and menus.

TP700 Time, Temperature, and Jets

How to set time, adjust temperature, and operate jet pumps on the TP700.

TP700 Modes and Service

Explanation of TP700 pool modes, service mode activation, and temperature range settings.

TP700 Filtration and Cleaning

Configuration of filtration cycles and understanding the automatic cleaning cycle on the TP700.

TP700 Additional Settings and Errors

Details on additional settings, system information, and timed messages for the TP700.

TP700 Error Code Reference

List of common TP700 error codes, their meanings, and required troubleshooting steps.

Standard (TP500) Control Panel

TP500 Main View and Symbols

Overview of the TP500 main display, showing temperature, time, and modes.

TP500 Jet Pump and Temperature Settings

How to operate jet pumps and set the water temperature on the TP500.

TP500 Time, Modes, and Service

Setting time, changing pool modes, and activating service mode on the TP500.

TP500 Filtration and Cleaning Cycles

Configuration of filtration cycles and understanding the automatic cleaning cycle for the TP500.

TP500 Timed Messages

Explanation of timed reminder messages displayed on the TP500 panel.

TP500 Error Code Reference

List of common TP500 error codes, their meanings, and required troubleshooting steps.

Factory Installed Accessories

Sink Paneling and Microsilk

Details on installing sink paneling and operating the Microsilk feature.

Supplementary Heater Installation

Electrical installation requirements for the supplementary heater.

ControlMySpa Remote Control Setup

Instructions for setting up and troubleshooting the ControlMySpa remote control system.

General Warranty Terms

Warranty Conditions and Limitations

Requirements for warranty validity and specific limitations or exclusions.

Warranty Claims and Procedures

Steps for reporting defects, assessing damage, and the repair or replacement process.

Novitek EXCLUSIVE Specifications

General

Brand	Novitek
Model	EXCLUSIVE
Category	Hot Tub
Language	English

Related product manuals

Novitek STANDARD

32 pages

Novitek LUMISPA 603