EasyManua.ls Logo

Novitek STANDARD - User Manual

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SISÄLLYSLUETTELO
SISÄLLYSLUETTELO
OUTDOOR HOT TUB INSTALLATION AND OPERATION MANUAL
ST2T, TP700, TP500
EXCLUSIVE
SELECT BASIC  PREMIUM
STANDARD
SELECT PREMIUM
SELECT BASIC
HALTI
OLOS
SALLA
EXCLUSIVE
KIILO
MALLA
YLLÄS
LEVI
PALLAS
STANDARD
LUOSTO
RUKA
HELMI
ROPI

Table of Contents

Questions and Answers

  • K
    Kayla MckeeAug 6, 2025
    How to fix cloudy water in my Novitek STANDARD Hot Tub?
    • L
      Linda HarveyAug 6, 2025
      Cloudy water in your Novitek Hot Tub can be due to several reasons. It could be caused by a dirty filter, so try cleaning it. Also, check if the pH value is within the recommended range and adjust it if necessary. Insufficient use of cleaning chemicals can also lead to cloudiness, so add a cleaning chemical to the water. If the water is too old or has been used excessively, consider replacing it.
  • M
    mjohnsonAug 10, 2025
    Why does my Novitek Hot Tub smell like chlorine?
    • B
      Beth AndersonAug 10, 2025
      A chlorine smell in your Novitek Hot Tub may indicate that the chlorine level is too high; in this case, wait for it to decrease. It can also be caused by a water pH level that is too low, so adjust the water pH level to the recommended range.
  • M
    Meghan McclainAug 14, 2025
    What causes irritated skin from my Novitek STANDARD?
    • E
      eryanAug 14, 2025
      Irritated skin after using your Novitek Hot Tub can occur due to unhygienic water, so you should add a cleaning chemical to the water. High free chlorine levels (over 5 mg/l) can also cause irritation, so wait for the free chlorine levels to drop.
  • R
    Rose RodriguezAug 19, 2025
    How to get rid of algae growth in my Novitek STANDARD?
    • E
      Elizabeth TylerAug 19, 2025
      Algae growth in your Novitek Hot Tub can be caused by a water pH level that is too high, so adjust the water pH level to the recommended range. Also, adding a cleaning chemical to the water may help.
  • T
    Tony WestAug 23, 2025
    What to do for musty smell in Novitek STANDARD?
    • K
      Kimberly WiseAug 23, 2025
      If your Novitek Hot Tub has a musty smell, it could be due to bacterial or algae growth. To resolve this, empty, clean, and refill the pool.
  • M
    matthewthomasAug 27, 2025
    What causes patches on the surface of my Novitek STANDARD Hot Tub?
    • S
      Summer CastroAug 27, 2025
      Patches on the surface of your Novitek Hot Tub can be caused by a total alkalinity of water that is too low, or a water pH level that is too low. In either case, adjust the water pH level to the recommended range.
  • A
    Amanda GravesAug 31, 2025
    How to remove organic layer from Novitek STANDARD Hot Tub?
    • E
      egarciaAug 31, 2025
      An organic layer in your Novitek Hot Tub is usually due to accumulated oil and dirt. You can wipe the dirt away with a clean sponge.

Summary

Installation and Startup Guide

Installation Site Options

Details various locations for pool installation, including ground, terrace, and indoors, with site requirements.

Startup Procedure

Step-by-step guide for powering up the pool for the first time after filling with water.

Electrical Installation Guidelines

Instructions for proper electrical hookup, emphasizing safety and licensed electricians.

Electrical Connection Specifications

Details connection requirements and wiring for different models.

Clearing Air Locks

Procedure to remove trapped air in piping for proper jet function.

Pool Maintenance and Care

Filling the Pool

Instructions for filling the pool with water, ensuring correct levels and preventing airlocks.

Water Care and Chemistry

Fiber Filter Maintenance

Information on the fiber filter's function, maintenance, and replacement.

Cleaning Chemicals and Water Balance

Guidance on using cleaning chemicals for disinfection and pH balance.

Water Care Troubleshooting

Guide to common water care problems, causes, and solutions.

Select Premium, Exclusive (ST2 T) Features

Setting Time and Temperature

Instructions for setting the pool's time and adjusting water temperature.

Error Code Reference

Guide to common error codes, their meanings, and troubleshooting steps.

Select Basic (TP700) Features

Setting Time on TP700

Instructions for setting the time on the TP700 control panel.

Setting Temperature on TP700

Adjusting the water temperature on the TP700.

TP700 Error Code Troubleshooting

Troubleshooting common error codes and their solutions for the TP700.

Standard (TP500) Features

Setting TP500 Temperature

Adjusting the water temperature on the TP500.

Setting TP500 Time

Instructions for setting the time on the TP500 control panel.

TP500 Error Code Troubleshooting

Troubleshooting common error codes and their solutions for the TP500.

General Warranty Terms and Conditions

Warranty Validity Conditions

Requirements that must be met for the pool's warranty to remain valid.

Warranty Claim and Repair Procedure

Procedures for reporting and handling warranty claims and repairs.

Novitek STANDARD Specifications

General IconGeneral
BrandNovitek
ModelSTANDARD
CategoryHot Tub
LanguageEnglish

Related product manuals