OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
19
EN
In the spa menu, you can view all the controllable devices in one glance. Within the menu, the pumps
and lights and jets can be easily controlled, and the screen turned. This view is dependent on the
accessories and amount of installed jets, so the view may vary with each pool. Use the arrow keys to
navigate in the Spa menu. The chosen function has a black frame, and the function can be controlled
with the select key
3
.
JETS 1 is a dual speed pump. In this menu you can easily check if the pump is on ltration or massage
speed. The JETS 1 symbol shows the status of the pump.
M8 is articial intelligence software contained in your spa’s BP control system. M8 looks for
opportunities to decrease device usage by evaluating water temperature readings. Stable water
temperatures equal less device usage and less wear and tear.
You can turn the M8 setting (On/Off) in the Settings menu under Heat.
SPA MENU
M8 ARTIFICIAL INTELLIGENCE
There is no need to navigate in the shortcut menu, the pool functions can be easily controlled within
one view. The jets and lights of the pool are controlled with the arrow keys, press the Select key
3
to
get back to the main view. Like in the Spa menu, the pump status can be easily viewed in the shortcut
menu.
SHORTCUT MENU
From time to time different timed reminder messages will appear at the bottom left side of the screen.
Messages can be bypassed by pressing the arrow key to the right. The most common messages and
their meaning are shown in the table below.
TIMED MESSAGES
MESSAGE MEANING
Check the pH Check the pH of the water and adjust the chemicals if necessary.
Check the sanitizer Check the amount of chloride and add if necessary.
Clean the lter Clean the lter.
Test the GFCI Check that the ground fault circuit interrupter is functional.
Change the water Replace the water in the outdoor spa pool.
Clean the cover Clean the insulation cover.
Change the lter Change the lter
SELECT BASIC TP700
To Next Page
