Novitek STANDARD - Cleaning Cycle; Turning the Display; Additioonal Settings; System Information

18
OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
EN
The screen view of the control panel is possible to turn for ease of use in the inside and outside of the
pool. The screen turns by selecting Invert in the Settings menu. Choose between the modes with the
arrow keys and conrm with the select key
3
.
TURNING THE DISPLAY
To view the additional settings, scroll the Settings menu. Use the arrow keys and select the wanted
setting in the settings menu.
ADDITIONAL SETTINGS
This information is only needed when asked by a service person. The view the system information,
select Diagnostics in the Settings menu. Use the arrow keys to navigate in the system information
menu.
SYSTEM INFORMATION
• Reminders: Messages, such as ”clean the lter” ON/OFF.
• Cleanup: Length of the additional ltration period after each time of use.
• Unit: Time: Time format 12 h/24 h.
• Unit: Temperature format °F/°C.
• Language: Control panel language.
• Panel: Screen and backlight time-out settings
• Software ID (SSID): Processor software version.
• System Model: Processor model.
• Current Setup: Number of predened setup program.
• Conguration Signature: Program validation number.
• Heater Wattage: Heater power kW (1—3/3 —6).
• Heater Type: Heater type.
• Dip Switch Settings: Control centre dip switch settings.
• Panel Version: Key panel program version.
The pool has an automatic pre-set cleaning cycle. The cleaning cycle starts when the pump has been
turned off for at least 30 minutes.
CLEANING CYCLE
SELECT BASIC TP700