Novomatics Operation Manual AlphaTackPlus
12
4. Installation
4.1. Software installations
There are two packages needed for instrument operation. Before starting make sure that the
instrument is off and the instrument cable is not connected to the computer.
4.1.1. Installation of WinAlphaTACK software from CDROM
1. Insert the installation CDROM WinAlphaTack
2. Start the program cdrom:\winalphatacksetup.exe manually if not started by auto
start
3. Follow the default adjustments by pressing Next
4.
4.1.2. Installation of WinAlphaTACK software from Internet
1. Visit: http://www.novomatics.de/downloads/
2. Login in with username and password
3. New users please fill out the registration request to receive login details
4. Download winalphatacksetup.exe
5. After downloading from Novomatics server start the program
winalphatacksetup.exe manually
6. Follow the default adjustments by pressing Next
7. The WinAlphaTack will be installed, USB driver is placed at {install path}\driver, for
example:
c:\program files\novomatics\winalphatack\driver
4.1.3. Installation of AlphaTackPlus device driver
1) USB Driver installation
Please note WinAlphaTack operation is fully verified for Windows 10 only.
Execute CDM21224_Setup.exe as administrator found on your WinAlphaTack
CDROM or within your WinAlphaTack installation path.
To Next Page
Loading...