Need help?Do you have a question about the Novusun CNC NVUM and is the answer not in the manual?
General| Input Voltage | 24V DC |
|---|---|
| Communication Interface | USB |
| Emergency Stop Input | Yes |
| Probe Input | Yes |
| Control System | Closed-loop |
| Step/Direction Output | Yes |
| Software Compatibility | Mach3 |
Overview of Novusun CNC's experience and the NVUMv1.1 motion controller.
Lists the key features and technical specifications of the NVUMv1.1 controller.
Details the physical dimensions, mounting holes, and overall appearance of the NVUMv1.1.
Explains common abbreviations and terms used throughout the NVUM manual.
Provides important notes and warnings for safe operation and handling of the device.
Explains the power supply structure, common GND points, and isolation for the NVUM.
Details the connection definitions and methods for various interfaces on the controller.
Explains the 6-axis stepper driver control output interface and its pin definitions.
Describes the spindle control output interface, speed adjustment, and feedback.
Details the common IO output interface, including its open drain structure.
Explains the MPG port connection, terminal definitions, and wiring tables.
Specifies the voltage and current requirements for the main power supply input.
Mentions the communication external port, which is currently undefined.
Details the Estop, limit, and tool setting input interfaces and their internal structure.
Explains the interface for adjusting parameters like FRO, SRO, and SJR.
Describes the USB communication port used for Mach3 connectivity.
Step-by-step guide for installing the MACH3 software on your system.
Instructions for registering the MACH3 software using the provided license file.
Details on how to install the NVUM plugin required for MACH3 operation.
Steps to open the MACH3 software and select the NVUM plugin.
Covers common settings and verification steps for the NVUM plugin.
How to confirm that the NVUM plugin is correctly loaded and active in MACH3.
Configuration of motor parameters like steps per pulse, velocity, and acceleration.
Configuration of input and output ports within the MACH3 software.
Procedures for setting up machine home and limit switch positions.
Steps to define the zero point for the workpiece.
Instructions for loading a G-code file and initiating machine operation.
Frequently asked questions and answers related to the NVUM hardware.
Frequently asked questions and answers pertaining to the software configuration.
To Next Page
