Need help?Do you have a question about the Novusun CNC NVCM5 and is the answer not in the manual?
General| Controller Type | CNC Motion Controller |
|---|---|
| Axis | 5 |
| Power Supply | 24V DC |
| Communication | USB |
| Input Ports | 16 |
| Communication Interface | USB |
| Supported Software | Mach3 |
| Number of Axes | 5 |
Guides through the installation, registration, and USB plug-in process for the MACH3 software.
Details how to configure motor tuning parameters like steps per, velocity, and acceleration for each axis.
Guides the user through configuring the Ports and Pins dialog for motor outputs, input signals, and spindle control.
Explains how to set the machine's original position and soft limits within the Mach3 software.
Details the process of moving the tool tip to the workpiece zero point and clearing coordinates.
Provides instructions on loading a G-code file and initiating the machine operation.
To Next Page
