Need help?Do you have a question about the Novusun CNC NVCM Series and is the answer not in the manual?
General| Brand | Novusun CNC |
|---|---|
| Model | NVCM Series |
| Category | Controller |
| Language | English |
Overview of Novusun CNC's expertise and the NVCM controller.
Key technical features and capabilities of the NVCM controller.
Physical dimensions and mounting details of the NVCM controller.
Glossary of common abbreviations used in NVCM operation.
Essential safety guidelines and operational warnings for the NVCM.
Explanation of the NVCM's power supply structure and grounding.
Introduction to the various physical connection interfaces on the NVCM.
Details on connecting limit switches, home sensors, Estop buttons, and probes.
Details the serial expansion interface for connecting external equipment.
Explains the MPG port and its pin definitions for manual pulse generation.
Description and pin assignments for the DB15 universal output interface.
Connecting the spindle control and the first universal output interface.
Wiring and connection details for the 6-axis stepper motor controller ports.
Step-by-step guide for installing the MACH3 CNC software.
Instructions for copying and installing the NOVUSUN.DLL plugin for Mach3.
Steps to launch Mach3 and select the correct plugin profile.
Configuring motor tuning parameters like steps per, velocity, and acceleration.
Introduction to Mach3 port and pin configuration dialogs.
Setting up stepper motor control pins for each axis in Mach3.
Configuring input signals for limit switches, Estop, and probe.
Configuring spindle control signals like CW, CCW, Mist, and Flood.
Setting the machine's home position and defining the coordinate system.
Configuring home direction and soft limits for each axis.
Setting the workpiece zero point and clearing axis coordinates.
Loading a G-code file and initiating machine operation via 'Cycle Start'.
To Next Page
