This manual describes the Now Drive and O-Drive snowboard bindings, a revolutionary design inspired by skateboard trucks, offering unparalleled performance and comfort. The bindings are designed for customization to suit individual needs and riding styles.

Function Description:

The Now Drive and O-Drive bindings utilize "Skate-Tech" to enhance energy transfer and reduce foot fatigue. Inspired by how easily and efficiently a skateboard turns, the system's major components mimic skateboard trucks. The 'Hanger' component powerfully transfers energy from the straps to the bushings and onto the board's edges. The Kingpin acts as a fulcrum, magnifying this energy through leverage. Unlike traditional bindings that diminish energy transfer by flexing and bending their baseplate, forcing riders to crank straps harder or use stiffer highbacks, Now bindings bypass the middle of the snowboard. Instead, they direct energy directly onto the board's edges, transferring more power with less effort. This design allows feet to remain more relaxed and comfortable for longer periods.

Usage Features:

Foot Pillow Access:

To access the disc cover and adjust settings, the soft EVA Foot Pillow at the heel needs to be opened. Simply grab the EVA pad and pull upward. To close the foot pillow, push down on the EVA while pulling the heelcup upwards. A "CLICK" will be heard on both sides when the foot pillow is properly closed.

Disc Orientation and Mounting:

The bindings accommodate various hole patterns and EST/Channel configurations.

4-Hole Pattern: For this pattern, arrows on the washers must point towards the squares on the disc.
3-Hole Pattern: For this pattern, arrows on the washers must point towards the triangles on the disc.
EST/Channel: No washers are needed for this configuration. It is crucial to note the direction the arrows are pointing on the washers for correct installation.

Stance Width Adjustment:

The disc allows for adjustment of the stance width. The manual illustrates how to orient the disc to achieve the desired width, with indicators for "toe" and "heel" to guide placement.

Boot Size Adjustment (Toe and Heel):

The disc also facilitates boot size adjustment to ensure the boot is centered across the board. Since snowboard boots vary, it's essential to check settings and confirm proper centering. The manual provides charts for Medium and Large bindings, indicating disc orientations for different boot sizes (e.g., Boot Size 7, 8, 10 for Medium; Boot Size 10, 11, 12+ for Large). Arrows on the disc indicate the direction for adjustment.

Straps Adjustments:

The straps feature a tool-free NOW lever for easy adjustment. To adjust, open the lever, unscrew it, move the straps to the desired location, tighten, and then close the lever.

Toe Strap Placement:

The toe cap strap is designed to be positioned and centered at the tip of the boots. Adjustments follow the same tool-free process as the main straps.

FlipIt Straps:

FlipIt Straps allow riders to interchange ankle straps between left and right bindings for a customized riding experience.

Step 1: Lift the tool-free NOW lever.
Step 2: Unscrew the lever, remove the ankle straps, flip them around, and switch them to the other binding. This feature allows for two primary configurations:
Upward Strap Support Setting: Provides added lateral support and board response.
Downward Strap Support Setting: Offers solid heel support and more tweaking ability.

NoBack Mode with HighCups:

For riders who prefer a "NoBack" setup, HighCups can replace the highbacks.

Step 1: Remove the highback by detaching the hardware on both sides using a Phillips #3 screwdriver and a 4mm Allen key.
Step 2: Replace the highback with a HighCup and reinstall the hardware. Ensure the t-nuts are properly fitted in the binding cavity and use a 4mm Allen key to hold them in place.

Forward Lean Adjustment:

To change the forward lean, pull down the lever and move the forward lean block either up or down. Once the desired position is reached, flip the lever back to the locked position.

Custom Bushing Options:

Now Drive and O-Drive bindings come assembled with either Medium (50 shore) or Hard (60 shore) bushings. These can be changed based on riding style, snow conditions, rider weight, or personal preference. To remove bushings, simply pop them out with a finger. It's important to note that toe and heel bushings are different; check the underside label before installing. Additional bushing options (e.g., Soft 45 shore) are available through the NOW online store or authorized dealers.

Maintenance Features:

Hardware Check: Before each use, riders must check and tighten all hardware.
Cleaning: While not explicitly detailed, regular cleaning of components would extend the life of the bindings.
Bushing Replacement: Bushings can be replaced to customize ride feel or as they wear out.

Safety Information:

Snowboarding is a hazardous sport with risks of serious injury or death. Riders use Now bindings at their own risk. It is crucial to read the instruction manual before installing and using the bindings. Only snowboard-specific boots should be used. The binding does not release on impact. A runaway snowboard is dangerous, so a leash is required at all times, attached to the binding's baseplate and securely fastened to the body, in compliance with ISO code 14573.

Warranty:

Now Snowboarding offers a lifetime warranty to the original purchaser on baseplate components (Hanger, Alumi-ring, and forge disc). All other parts have a one-year limited warranty. The warranty is non-transferable, and Now reserves the right to repair or replace faulty parts at its discretion. Further warranty policy details are available on now-snowboarding.com.

now! DRIVE - Disc Orientation for Stance

Related product manuals