8
EN
BASIC SAFETY PRECAUTIONS
during installation and operation
To ensure correct operation the desk base needs to be
initialised before first use
The desk is fitted with an electromotor height adjustment system and it is
designed to be used for work in asitting or standing position in dry indoor
spaces only
The desk must not be operated by children!
It can only be used by persons older than years of age
Do not slide the desk on the floor or lift it by holding the desktop! It is
recommended that the desk can only be moved after being set to the lowest
height and disconnected from power source by two people holding the desk
by the base
Do not exceed the maximum permissible load of kg which should be evenly
distributed across desk surface Take into account the weight of additional
items such as computer holder Do not use the desk for lifting people or cargo!
Asafety distance of at least mm between moving parts of the desk and
other furniture must be kept
When adjusting desk height pay attention to people and objects nearby
The maximum uninterrupted lifting time allowed is minute followed by
abreak in desk adjustment of at least minutes
Do not make any modifications to the design of the product
Any modification will result in the loss of warranty and may endanger
your safety
Care and cleaning
Regularly remove dust and dirt from the outer surfaces of the system and check for
any damage Check electrical wiring connections and screw connections regularly Any loose
screws must be tightened
Disposal
Desk components must be disposed of segregated based on the specific material groups
Disposing of desk components always observe local environmental regulations
To Next Page
Loading...
