What to do if NPG Mini DHT 18M remote control is not responding?
If the remote control for your NPG TV Receiver isn't responding, try these steps: First, the batteries might be exhausted, so replace them. If that doesn't work, make sure the remote control is pointed towards the Set Top Box and that you are close enough to it. Adjust the position or move closer.
Why is there no picture on my NPG Mini DHT 18M?
If there's no picture on your NPG TV Receiver, it could be due to a couple of reasons. First, check if the power is connected; if not, connect it. Also, make sure the power switch is turned on. Switch it on if it's off.
How to fix NPG Mini DHT 18M TV Receiver when the screen shows “No Signal”?
If your NPG TV Receiver screen displays “No Signal”, the issue could be with the DVB-T cable. Ensure it is properly plugged in. Another potential cause is a faulty aerial cable. Inspect the aerial cable and its connections to ensure they are secure and in good condition.
What to do if there is no sound from NPG Mini DHT 18M TV Receiver speakers?
If you're not getting any sound from your NPG TV Receiver speakers, there are a couple of things to check: - First, ensure the audio cable is correctly connected. - Also, verify that the sound isn't muted by turning off the mute function.
General| HDMI Output | Yes |
|---|---|
| Tuner Type | DVB-T2 |
| Video Decoding | H.264 |
| Audio Decoding | MPEG-1 Layer I/II, AAC |
| Resolution | Up to 1080p |
| Power Supply | 5V DC |
Provides 15 numbered instructions for safe operation, handling, and maintenance.
Highlights critical risks related to moisture, electrical shock, and battery heat exposure.
Details the connectors and indicators on the front of the device.
Details the connectors and indicators on the rear of the device.
Diagram and labels identifying buttons and functions of the remote control.
Instructions for inserting 2xAAA batteries into the remote control.
Guidance on how to operate the remote control effectively.
Explains how to connect the set-top box to a television using SCART or HDMI.
Details the on-screen installation guide for language, country, and channel search setup.
Covers programme settings, editing preferences, and managing favourite channels.
Instructions for channel operations (delete, skip, move, lock) and using the EPG.
Includes channel sorting, picture settings, channel search, and time configurations.
Covers display/language options, system settings (password, reset), USB multimedia, and software updates.
Addresses common problems like no picture, no sound, and remote control issues with corrective actions.
Details input frequency, RF input level, IF bandwidth, and modulation for the tuner.
Covers decoder formats, output formats, and output ports for video and audio.
Specifies USB 2.0 support, power requirements, and physical dimensions.
To Next Page
