COMPACTOR/DRIVER SERIAL NUMBER
LOCATION
The serial number of your unit is required any time that you are placing a parts order or
requiring technical assistance. Failure to use the serial number when ordering parts,
may result in receiving the incorrect parts, resulting in additional cost and down time.
The serial number will be comprised of the following sequence of numbers and letters:
0N-0000. (Units that shipped before July of 1999, will have a five-digit number stamped
into the upper frame.)
The location described below is between the inlet and outlet hydraulic ports on the
upper frame.
The serial number tag (sn2) can be found on the upper frame assembly. Additionally,
the serial number (sn1) is stamped below the serial number tag on the upper frame
assembly.
To Next Page
Loading...