Power supply connections
Reminder
MCB Fuse box
Maintenance
10
ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY. THE ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.
on/off switch
: USE ONLY NSB FAN, SPECIFIC REMOTE CONTROL TO CONTROL
FAN’S SPEED. DO NOT CONNECT THE FAN TO THE DIMMER
SWITCH OR WALL REGULATOR.
Due to the fan’s natural movement, connections may get loose after a period of usage,
to ensure proper and safe usage, it is highly recommended to inspect and tighten
all connections every 6 months.
Cleaning your fan periodically will prolong its new appearance. Basic cleaning
procedures are as follows:
1) Use only water. NO detergent, corrosive acidic solution.
2) Use only a soft damp cloth to clean the fan.
3) No lubricating oil on the fan’s spare parts.
To Next Page
Loading...