How to fix difficult measurement with NSK Osseo 100?
If you're finding it difficult to achieve a measurement with your NSK Medical Equipment, try holding the instrument tip closer to the tip of the peg. Also, ensure that no soft tissue is touching the peg, as this may impede its vibration.
What to do if not all segments are lit up when NSK Osseo 100 Medical Equipment is started?
If not all segments light up when you start your NSK Medical Equipment, it indicates that the instrument is damaged and has to be sent for repair.
Why NSK Osseo 100 shows noise warning?
The noise warning on your NSK Medical Equipment, both audible and visible on the display, may be triggered by an electric device situated near the instrument. Attempt to identify and remove the source of the interference to resolve this issue.
Procedure for turning the instrument on and off, including automatic shutdown.
Step-by-step guide for performing a measurement using the Osseo 100 device.
Instructions for cleaning the MulTipeg and MulTipeg Driver using specified solutions.
Procedure for sterilizing the MulTipeg and MulTipeg Driver using a pre-vacuum steam sterilizer.
Common issues encountered during operation and their potential causes.
Explanation of error codes displayed by the instrument during malfunction.
General| Brand | NSK |
|---|---|
| Model | Osseo 100 |
| Category | Medical Equipment |
| Language | English |
To Next Page
