Why I cannot increase the rotational speed of NSK Dental equipment?
If you cannot increase the rotational speed of your NSK Dental equipment, check if the rotational speed is restricted. If so, adjust the Speed Adjustment Area in the Main Panel to set the desired rotational speed.
Why NSK Dental equipment causes abnormal heating during rotation?
Abnormal heating during rotation in your NSK Dental equipment is caused by continuous use over a long period. Stop operating the attachment and motor immediately and wait until they cool down before continuing.
What to do if my NSK Medical Equipment cutting accessory cannot be firmly mounted?
If the cutting accessory cannot be firmly mounted, several factors could be at play. First, ensure the cutting accessory is inserted all the way through. Then, confirm that the twist collet or latch is fastened or slid to the chuck close position after inserting the accessory. Check the mounting and removing procedures for cutting accessories. Verify that you are using the correct cutting accessory and replace it if it's deformed. If the twist collet is damaged, contact your Authorized NSK Dealer.
Why is there no rotation when the Hand Switch is depressed on my NSK Primado2 Medical Equipment?
If there is no rotation when the hand switch is depressed, ensure the safety lock of the motor is in the ON position. If the issue persists with the safety lock ON, it may indicate a malfunction, and you should contact your Authorized NSK Dealer.
What to do if the attachment cannot be connected to the motor of my NSK Medical Equipment?
If the attachment cannot be connected to the motor, ensure the ' ? ' mark of the attachment and the ' ? ' mark of the motor are aligned correctly. If the connection part is deformed, contact your Authorized NSK Dealer.
How to fix no rotation after attaching cutting accessories to NSK Dental equipment?
If there's no rotation after attaching cutting accessories to your NSK Dental equipment, ensure that the twist collet on the attachment is fastened after inserting the cutting accessory. Turn it in the direction indicated by the symbol ‘ ’.
Why NSK Dental equipment has weak torque, slow responsiveness in rotation, and takes time to stop rotating?
If your NSK Dental equipment exhibits weak torque, slow responsiveness, and takes time to stop rotating, it might be because the motor is set at a low value. Check the motor setting in the Option Set Up screen and adjust it, or revert to the factory default setting.
What to do if my NSK Dental equipment shows a dark screen?
If the screen on your NSK Dental equipment is dark, adjust the brightness of the background by setting up the Control Unit in the Option Set Up screen.
How to fix a dark screen on my NSK Primado2?
If the screen is dark, the Control Unit may be set to a low brightness value. Adjust the brightness of the background by setting up the Control Unit in the Option Set Up screen.
How to increase the rotational speed on my NSK Primado2?
If you cannot increase the rotational speed, it may be restricted. Adjust the Speed Adjustment Area in the Main Panel to set the desired rotational speed.
Covers DANGER, WARNING, and CAUTION statements for safe use and potential hazards.
Provides detailed specifications like speed, dimensions, and applicable accessories for each attachment.
Outlines the steps to check the attachment and accessory for proper function before use.
Lists common problems and solutions for SMH and HMH series attachments.
Provides troubleshooting guidance for common issues encountered with BMH series attachments.
Offers solutions for common problems and errors with WPD series attachments.
General| Brand | NSK |
|---|---|
| Model | Primado2 |
| Category | Medical Equipment |
| Language | English |
To Next Page
