NSK Primado2 User Manual (English)

Other manuals for NSK Primado2

Questions and Answers:

J
Jonathan AlexanderAug 22, 2025
How to troubleshoot irrigation problems with my NSK Medical Equipment?
- M
  Melanie StricklandAug 22, 2025
  First, check the Irrigation Tube for kinks, plugging, or cracks; fix any kinks, and replace the tube if it's plugged or cracked. Next, ensure the irrigation isn't set to 0% or OFF in the Control Unit's Main Panel, and adjust accordingly. Lastly, verify the Irrigation Tube is correctly mounted in the Irrigation Pump; if it's in the wrong direction, remove and reinstall it.
C
Christopher AdamsAug 25, 2025
Why NSK Dental equipment causes abnormal heating during rotation?
- T
  Thomas AllenAug 25, 2025
  Abnormal heating during rotation in your NSK Dental equipment is caused by continuous use over a long period. Stop operating the attachment and motor immediately and wait until they cool down before continuing.
C
christopher44Aug 25, 2025
What to do if my NSK Medical Equipment cutting accessory cannot be firmly mounted?
- T
  Tonya DaltonAug 26, 2025
  If the cutting accessory cannot be firmly mounted, several factors could be at play. First, ensure the cutting accessory is inserted all the way through. Then, confirm that the twist collet or latch is fastened or slid to the chuck close position after inserting the accessory. Check the mounting and removing procedures for cutting accessories. Verify that you are using the correct cutting accessory and replace it if it's deformed. If the twist collet is damaged, contact your Authorized NSK Dealer.
C
Courtney ReynoldsAug 27, 2025
Why is there no rotation when the Hand Switch is depressed on my NSK Primado2 Medical Equipment?
- T
  Tiffany WilsonAug 27, 2025
  If there is no rotation when the hand switch is depressed, ensure the safety lock of the motor is in the ON position. If the issue persists with the safety lock ON, it may indicate a malfunction, and you should contact your Authorized NSK Dealer.
D
Daniel GilesAug 27, 2025
What to do if the attachment cannot be connected to the motor of my NSK Medical Equipment?