7
English
4 Cleaning / Checking the Control Unit
4 – 1 Wipe Disinfecting
Wipe the product using a cloth moistened with alcohol disinfectant (e.g. Meliseptol
®
rapid).
CAUTION
● Do not soak the Control Unit in water.
● Prevent water from entering the Connector portion.
● Do not sterilize the Control Unit.
4 – 2 Checking
Check with the same procedure described in "Check before Operation (Control Unit)".
Proceed to Storage (see “11 Storage”)
NOTICE
● To perform "Check before Operation (Control Unit)", refer to OM-SE0021E Primado2 OPERATION MANUAL Control Unit and Foot
Controls.
5 Cleaning / Checking the Foot Control
5 – 1 Cleaning/Wipe Disinfecting
1
Wipe the product using a cloth moistened with neutral
enzymatic detergent.
2
Remove the detergent using a cloth moistened with water.
3
Wipe the product using a cloth moistened with alcohol
disinfectant (e.g. Meliseptol
®
rapid).
CAUTION
● Do not soak the Foot Control into water.
● Prevent water from entering the Connector portion.
● Do not sterilize the Foot Control.
5 – 2 Checking
Check with the same procedure described in "Check before Operation (Foot Control)".
Proceed to Storage (see “11 Storage”)
NOTICE
● To perform "Check before Operation (Foot Control)", refer to OM-SE0021E Primado2 OPERATION MANUAL Control Unit and Foot
Controls.
To Next Page
Loading...
Need help?
General
