EasyManua.ls Logo

NSK PTL-CL-LED - LED and Power Source Safety Precautions

NSK PTL-CL-LED
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
EN FR
CAUTION
Do not use the following fluids to wipe, immerse or
clean the product; strong/super acid water, strong
acid/alkaline chemicals, solutions containing
chlorine, solvents such as benzine or thinner.
Perform regular function and maintenance checks.
(Refer to "6–3 Periodical Maintenance Checks")
To avoid clinical downtime it is recommended that a
spare be kept on hand in case of a breakdown during
treatment.
Do not connect or disconnect the hose or handpiece
until the drive air has completely stopped.
Do not use a washer-disinfector for the coupling.
Failure to do so may result in malfunction or electric
shock.
Do not use air contaminated by dust, moisture or oil.
CAUTION
Avoid continual eye contact with the LED light.
(PTL-CL-LED, PTL-CL-LED III, KCL-LED )
This product is classified as Class 1 LED Product.
Use a power source which meets the following
requirements.
1. The electricity supply of the power source is below
15W both under normal and single-failure
conditions.
2. The power source uses a SELV circuit for
electricity supply.
3. The output voltage of the power source is within
the range recommended by the manufacturer of
this product.
U.S. Federal law restricts this device to sale by or on
the order of a licensed physician.

Other manuals for NSK PTL-CL-LED