4
Part Name Quantity Remarks
1 KCL Coupling Wrench 1 KCL-LED
2 KCL O-ring Set 1 KCL-LED
3 Package Contents 4 Preparation for Use
4–1 Connecting / Disconnecting
4–1–1 Connecting the Hose
PTL-CL-LED, PTL-CL-LED III, PTL-CL-FV-T,
FM-CL-M4, FM-CL-M4-T, QD-J B2/B3, QD-J
M4
1 To connect, align the pipes of the coupling with the pipe
holes of the hose, then insert them carefully and firmly,
and tighten the hose nut securely (1) (Fig. 1).
2 Hold the non-rotating part and connect to the hose
securely and make sure there is no looseness in the
hose connection (2) (Fig. 2). (When checking, do not
hold the ring as it will rotate.)
To Next Page
Loading...