5
EN FR
KCL-LED
1 To connect, align the pipes of the coupling with the pipe
holes of the hose, then insert them carefully and firmly,
and tighten the hose nut securely (1) (Fig. 3).
2 Tighten the coupling with the coupling wrench provided
with the product and tighten the hose nut.
3 After connecting to the hose, make sure there is no
looseness in the hose connection (2).
Fig. 3
1
2
Fig. 1
1
2
Fig. 2
1
2
Use an optional coupling wrench if you are concerned about
tightening. For information on how to use the coupling
wrench, see “4–2 How to use a PTL Coupling Wrench
(Option)”.
To Next Page
Loading...