To Next PageTo Next Page
Need help?Do you have a question about the NTI Trin & Stor S40 and is the answer not in the manual?
General| Brand | NTI |
|---|---|
| Model | Trin & Stor S40 |
| Category | Water Heater |
| Language | English |
Details on the different Trin & Stor series, including materials and performance.
Information on SRCC OG-300 and CAN/CSA F-379.1-09 compliance for solar models.
Checklists for installation, operation, and maintenance to ensure proper setup.
Outlines the user's responsibility for proper installation, inspection, and use.
Defines installer qualifications and responsibilities for safe and code-compliant installations.
Discusses Legionella bacteria risks, contributing factors, and prevention in water systems.
Explains scald injury risks from hot water and basic precautions for safe use.
Recommends thermostatic mixing valves for tempering hot water to prevent scalds.
Provides general best practices for maintaining and operating potable water systems.
Details connection ports and domestic water piping for indirect water heaters.
Tips on improving system efficiency through pipe insulation and conserving energy.
Instructions on flushing the system and checking water chemistry before filling the tank.
Lists factory supplied and required field supplied components for the system.
Covers essential components like T&P valves, sensors, expansion tanks, and mixing valves.
Instructions for connecting the indirect water heater to an external hot water boiler.
Guidance for connecting the indirect water heater to a solar thermal system.
Step-by-step guide on how to properly install the tank sensor.
Diagrams showing how to wire the tank sensor to different NTI Trinity boiler models.
Details on adjusting control settings for Tft and Lx series boilers using the tank sensor.
Instructions for adjusting control settings for Tx series boilers with a tank sensor.
Procedure for filling the water heater and performing initial checks.
A checklist to verify correct operation after filling and connecting the system.
Checklist for visually inspecting all components for leaks and signs of wear.
Checklist for verifying temperature settings, operating valves, and checking system health.
Steps for safely draining the water heater for servicing or winterization.
Instructions for reinstalling the heat exchanger coil, particularly for the SL Series.
A list of part numbers and descriptions for Trin & Stor indirect water heaters.
